Husqvarna RZ3016
Manuals and User Guides for Husqvarna RZ3016. We found 1 manuals for free downloads Operating instructions
Below you will find brief information for zero turn mower RZ3016. This manual is a valuable document. Read the contents carefully before using or servicing the machine. The following of instructions (use, service, maintenance) by all who operate this machine is important for the safety of the operator and others. It can also considerably increase the life span of the machine and increase its resale value. If you sell your machine, be sure to give the operator manual to the new owner. The final chapter of this operator manual provides a Service Journal. Ensure that service and repair work are documented. A well-kept service journal reduces service costs for the maintenance and affects the machine’s resale value. Please contact your dealer for more information. Take the operator manual along when the machine is taken to your dealer for service.
Key Features
Zero turning capability
Hydrostatic transmission
Cutting height adjustable
Engine shut off valve
Blade control lever
Mower deck lifting lever
Easy starting
Mowing tips
Safe handling of gasoline
Maintenance schedule
Pages: 36 Husqvarna RZ3016 Operating instructions
Brand: Husqvarna Category: Lawnmowers Size: 7 MB
Languages: English
Open manualFrequently Answers and Questions
What kind of gasoline should I use for this mower?
Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine. The use of any gasoline exceeding 10% ethanol (E10) will void the product warranty.
How do I engage the mower blades on my RZ3016?
To engage the mower blades, slowly lift the blade control lever up and into the lock notch.
How do I adjust the cutting height on my RZ3016?
The cutting height is set by placing a lever in the notch for the desired cutting height. The lifting lever can also be used to temporarily adjust the cutting height, such as when passing a minor bump in the lawn.
Where can I find the manufacturing number for my RZ3016?
The machine’s manufacturing number can be found on the printed plate affixed to the engine compartment.
What is the recommended air pressure for the rear tires on my RZ3016?
The recommended air pressure for the rear tires on your RZ3016 is 15 psi / 103 kPa / 1 bar.
advertisement