57 Manuals

Hydrolevel Fuel Smart 3200-Plus

Manuals and User Guides for Hydrolevel Fuel Smart 3200-Plus. We found 2 manuals for free downloads Manual

Below you will find brief information for boiler control Fuel Smart 3200-Plus. This control includes Thermal Targeting™ technology, Outdoor Reset and Warm Weather Shut-Down capability with the addition of Hydrolevel OS-100 Outdoor Sensor Kit (sold separately), and more. The control automatically prioritizes domestic hot water giving priority to low limit setting or to calls from indirect water heater, and it reduces condensation by holding circulator off until boiler reaches 125°F.

Key Features

Thermal Targeting™ technology
Outdoor Reset and Warm Weather Shut-Down
Universal Design
Operating Indicators LED, Dynamic Display and Test Button
Prioritizes Domestic Hot Water
Reduces Condensation

Hydrolevel Fuel Smart 3200-Plus Installation Instructions & Operating Manual

Pages: 16 Hydrolevel Fuel Smart 3200-Plus Manual

Brand: Hydrolevel Category: Water heaters & boilers Size: 5 MB

Languages: English

Open manual

Frequently Answers and Questions

What does Thermal Targeting™ technology do?

Thermal Targeting™ technology analyzes thermostat activity and continually evaluates how much heat the house requires. It continually sets target temperatures below the high limit setting to maximize fuel efficiency.

What is the purpose of the Outdoor Reset feature?

The Outdoor Reset feature automatically activates outdoor reset functionality and warm weather shutdown capability when plugged into the Fuel Smart HydroStat control. This feature is available with the addition of Hydrolevel OS-100 Outdoor Sensor Kit (sold separately).

What is the function of the Low Water Cut-Off feature?

The Low Water Cut-Off feature provides protection against potentially dangerous low water conditions, particularly when installed with the Hydrolevel Electro-Well™.

How can I test the Low Water Cut-Off function?

To test the Low Water Cut-Off, press and hold the Test/Settings button for 5 seconds. The display will read LCO. The red Low Water light should illuminate and the burner circuit (B1 and B2) should de-energize.

How can I change the setting for the Circulator Hold Off feature?

To change the setting for the Circulator Hold Off, turn the LO TEMP dial to access the Program Mode – indicated in the display as " ". Then turn the HI TEMP dial to select feature " ". Press the Test/Settings Button to turn the Circulator Hold Off on or off.

How can I restore the factory default settings for the Fuel Smart HydroStat?

To restore all features to the factory default settings, turn the LO TEMP dial to access the Program Mode – indicated in the display as " ". Then turn the HI TEMP dial to select feature " ". Press the Test/Settings Button to reset all features to the default settings.