ICECAT GAS/PRO 220
Manuals and User Guides for ICECAT GAS/PRO 220. We found 1 manuals for free downloads Manual of use and maintenance
The ICECAT GAS/PRO220 Ice Resurfacer is a powerful and efficient machine designed for resurfacing ice rinks. It features a robust design, a powerful engine, and a user-friendly control panel. This manual provides comprehensive instructions on operating and maintaining the machine for optimal performance and longevity. The ICECAT GAS/PRO220 Ice Resurfacer is equipped with a wide range of features, including a robust snow tank, a powerful auger, and a water spreading towel, making it ideal for maintaining ice rinks of various sizes.
Key Features
Powerful engine
Robust snow tank
Water spreading towel
Side brush
User-friendly control panel
Pages: 30 ICECAT GAS/PRO 220 Manual of use and maintenance
Brand: ICECAT Category: Electrical equipment & supplies Size: 1 MB
Languages: English
Table of contents
Open manualFrequently Answers and Questions
How do I start the ICECAT GAS/PRO220 Ice Resurfacer?
Open either the gasoline tap in the gasoline tank (GAS220 machines) or LPG bottles (PRO220 machines), depending on your machine. Then, check that the ignition key is in its leftmost position, the direction selector is in its middle position, the motor rotation speed is low, and all buttons are in their upper or middle positions. Turn the ignition key to the right and finally, turn it to the extreme right to start the motor. Allow the motor to run for 30 seconds before starting work.
How do I change the blade of the ICECAT GAS/PRO220 Ice Resurfacer?
Place the sled on supports and place boards under the blade. Remove the cover sheets from the sled, open the screws that attach the blade, and let the blade fall onto the boards. Remove the old blade and lift the new blade onto the boards. Push the new blade under the sled and tighten the mounting screw.
How often should I change the hydraulic oil in the ICECAT GAS/PRO220 Ice Resurfacer?
For a new machine, the oil must be changed after 100 hours of operation. For subsequent changes, change the oil every 500 hours of operation. If the machine is not used for an extended period of time, check the oil quality and change it if necessary.
advertisement