627 マニュアル

KMC Controls CTE-5104

のためのマニュアルとユーザーガイド KMC Controls CTE-5104. 見つかりました 1 無料ダウンロード用マニュアル Installation manual

KMC Controls CTE-5104 is a versatile electronic room thermostat designed for HVAC applications. It offers dual setpoints for upper and lower flow limits, allowing precise temperature control. The device features temperature averaging input, velocity input for read-out, and a 12VDC power output. It can be wired to a controller for flow monitoring and provides adjustable minimum and maximum control points, ensuring optimal system performance.

主な特徴

Dual setpoints
Temperature averaging
Velocity input
12VDC power output
Adjustable limits
Flow monitoring

ページ: 4 KMC Controls CTE-5104 Installation manual

ブランド: KMC Controls カテゴリー: Electrical equipment & supplies サイズ: 158 KB

言語: English

マニュアルを開く

よくある質問と回答

How do I adjust the minimum and maximum flow limits on the CTE-5104?

You can adjust the minimum and maximum flow limits using the dials on the thermostat. Ensure the CSP's Min. dial is turned fully CCW to “0” and the Max. dial is turned fully CW to “100” to ensure the CSP does not affect the limits. Refer to the manual for detailed instructions.

What is the purpose of the velocity input on the CTE-5104?

The velocity input allows you to monitor the air flow rate through the HVAC system. This information can be used to optimize system performance and ensure proper air distribution.

Can I use the CTE-5104 to control both heating and cooling systems?

Yes, the CTE-5104 can be used for both heating and cooling applications. It offers RA (reheat) and DA (direct) control modes for adjusting the setpoints according to the desired system operation.