Kieback&Peter DDC4000
Manuals and User Guides for Kieback&Peter DDC4000. We found 2 manuals for free downloads Documentation, User manual
The DDC4000 is a decentralized control system that provides a plant with new options. It features Ethernet communication between the DDC4000 Central Units and BMS, a flexible and user-friendly touchscreen interface, BACnet native communication, structured parameterizing, and remote control via any Windows PC without additional software.
Key Features
Ethernet communication
Touchscreen interface
BACnet native
Structured parameterizing
Remote control
Pages: 509 Kieback&Peter DDC4000 Documentation
Brand: Kieback&Peter Category: Electrical controls Size: 6 MB
Languages: English
Table of contents
Open manualOther manuals and documents
Frequently Answers and Questions
What are the objectives achieved with the development of the DDC4000 system?
The objectives achieved with the development of the DDC4000 system include: Ethernet communication between the DDC4000 Central Units and BMS, flexible and user-friendly touchscreen interface, BACnet native communication, structured parameterizing, and remote control via any Windows PC without additional software. Please refer to the DDC4000 instruction manual for detail information.
How do I set up the Ethernet interface on the DDC4000?
To use the Ethernet interface, connect the socket on the back of the device with a network cable type Cat.5 (or Cat.6, Cat.7). For communication, each DDC4000 can use up to 3 IP addresses: one for all services when using Ethernet cabling, one if J-Y(St)Y cabling is used, and one for connecting via the modem (PPP). The IP addresses and sub-network mask and any essential gateway address are provided by your system administrator.
How do I connect the DDC4000 to a BMS?
A BMS is connected via Ethernet to the DDC4000 system. As the BACnet communication is used for this, ensure that Port #BAC0 is switched freely throughout (router...). Please refer to the 'Ethernet' chapter for the details of the Ethernet cabling and setting up BACnet communication.
Questions & Answers
Y Y A
How to reset the central unit to resolve persistent errors?
The device features a dedicated reset button located in the switches and buttons section. To address deeper system issues, a cold start or warm start procedure can be performed.
G G A
Do cold start, warm start, or reset actions erase existing configurations?
No, performing a cold start, warm start, or reset does not erase the existing configuration. Configuration data is preserved outside of these startup processes, typically on a CompactFlash card.
advertisement