19 Manuals

Lance Design ADX 2400N

Manuals and User Guides for Lance Design ADX 2400N. We found 4 manuals for free downloads Installation and Operation Manual

Below you will find brief information for Audio Distribution and Delay System ADX 2400N, Announce Unit ADX 120, XLR Interface Frame ADX 140. The ADX-2400N is a powerful and versatile audio distribution and delay system that can be used in a variety of applications, including live sound, broadcast, and post-production. It features 24 channels of analog audio input and output, as well as Cobranet networking for audio transmission over Ethernet. The ADX-2400N can be used as a stand-alone delay unit, or it can be integrated into a larger audio network.

Key Features

24 channels of analog audio input and output
Cobranet networking for audio transmission over Ethernet
Stand-alone delay unit
Integrated into a larger audio network
Low-latency operation
Announce Booth mode

Pages: 32 Lance Design ADX 2400N Installation and Operation Manual

Brand: Lance Design Category: Musical Equipment Size: 352 KB

Languages: English

Open manual

Frequently Answers and Questions

What is the difference between normal mode and announce booth mode?

Normal mode is used for general-purpose transmission and distribution applications, while announce booth mode is used to provide the 'head end' or truck end of an ethernet-based announce booth system.

How do I select the operating mode?

To select Normal mode, turn section 3 of the options dipswitch on the subpanel (behind the front panel) OFF and press the Reset button. To select Announce Booth mode, turn section 3 of the options dipswitch on the sub-panel (behind the front panel) ON and press the Reset button.

What are the bundle numbers used for?

Bundle numbers are used to assign packets of audio data to specific transmitters and receivers on the network.

What is the difference between broadcast and unicast bundles?

Broadcast bundles can be received by any number of receivers, while unicast bundles can only be received by one receiver at a time.

How do I connect the ADX-2400N to a network?

You can connect the ADX-2400N to a network using a standard Ethernet switch. Each ADX unit must be connected to the switch on its own port. If multiple switches are used, it is desirable for the switches to connect to each other using gigabit Ethernet.