626 Manuals

Laser Volkswagen Audi Group 1.2 FSI/TFSI | 1.4 | 1.6 FSI | 1.4 TSI

Manuals and User Guides for Laser Volkswagen Audi Group 1.2 FSI/TFSI | 1.4 | 1.6 FSI | 1.4 TSI. We found 1 manuals for free downloads Instructions

Engine Timing Tools Volkswagen Audi Group 1.2 FSI/TFSI | 1.4 | 1.6 FSI | 1.4 TSI help to correctly set the valve timing on a variety of Volkswagen and Audi engines. This set includes a camshaft locking tool, crankshaft locking pin, camshaft alignment tool, tensioner locking pin, TDC indicator and guide pins for supercharger installation. It is important to follow all general precautionary preparation work, and then if removing the timing chain, it is necessary to remove the timing chain cover and sump. A compression check of all cylinders should be performed before removing the cylinder head.

Key Features

Camshaft locking tool
Crankshaft locking pin
Camshaft alignment tool
Tensioner locking pin
TDC indicator
Guide pins for supercharger installation

LASER Engine Timing Tools Volkswagen Audi Group 1.2 FSI/TFSI | 1.4 | 1.6 FSI | 1.4 TSI Instructions

Pages: 4 Laser Volkswagen Audi Group 1.2 FSI/TFSI | 1.4 | 1.6 FSI | 1.4 TSI Instructions

Brand: Laser Category: Crankshaft Size: 1 MB

Languages: English

Open manual

Frequently Answers and Questions

What engines are these timing tools compatible with?

These engine timing tools are compatible with Volkswagen and Audi engines, specifically the 1.2 FSI/TFSI, 1.4, 1.6 FSI, and 1.4 TSI engines.

What are the safety precautions when using these timing tools?

Remove spark or glow plugs to make the engine turn easier. Observe all tightening torques. Do not use cleaning fluids on belts, sprockets or rollers. Always refer to the vehicle manufacturer's service manual or a suitable proprietary instruction book. Always make a note of the route of the auxiliary drive belt before removal. Incorrect or out of phase engine timing can result in damage to the valves. Turn the engine in the normal direction (clockwise unless stated otherwise). It is always recommended to turn the engine slowly, by hand, and to re-check the camshaft and crankshaft timing positions. Do not use the timing chain to lock the engine when slackening or tightening crankshaft pulley bolts.

What is the purpose of the camshaft locking tool?

The camshaft locking tool is used to lock the camshaft in the correct position during timing belt or chain replacement. It is used on the 1.2 FSi engines with codes CBZA and CBZB.