LaserPro LaserPro VENUS
Manuals and User Guides for LaserPro LaserPro VENUS. We found 1 manuals for free downloads User manual
Below you will find brief information for LaserPro VENUS. This user manual guides you through the setup, operation, and maintenance of your LaserPro VENUS CO2 laser engraver. It covers everything from hardware and software installation to control panel functions, various engraving and cutting modes (including 3D and stamp), safety precautions for CO2 laser technology, and basic troubleshooting tips, ensuring you can efficiently utilize its capabilities.
Key Features
CO2 Laser technology for engraving and cutting
Class 1 safety rating (Class 3a with red dot pointer)
Flexible memory buffer with Single/Multiple file modes
Automatic focusing capability (Auto Focus)
Supports multiple focal length lenses (1.5", 2.0", 2.5")
Includes Black & White, Manual Color Fill, 3D Effect, and Stamp Modes
Adjustable laser speed and power settings
Compatible with Windows 9x/XP and various design software
Maximum engraving speed of 508 mm/sec (20 inch/sec)
Pages: 57 LaserPro LaserPro VENUS User manual
Brand: LaserPro Category: Print & Scan Size: 2 MB
Languages: English
Open manualFrequently Answers and Questions
What materials can be processed by the CO2 laser?
The CO2 laser can process materials such as acrylic, wood, fabrics, glass, leather, marble, stone, rubber stamps, paper products, coated metals, plastics, and hard-surface materials blended with polyester and fibers. Bare metals can be marked using a special spray.
What is the life cycle of the laser source?
The life cycle of the laser source is approximately 20,000 hours. It can be refilled and this service should be done by your dealer.
What is the main purpose of the air assist system?
The air assist system significantly improves engraving and cutting by blowing away vaporized particles and helping to prevent fire due to overheating.
What does the cutting table do?
The cutting table, also known as a honeycomb table, is particularly useful for vector cutting. It creates a space between materials and the working table, allowing heat and smoke to dissipate and vent, which prevents poor cutting effects.
What is the maximum engraving speed of LaserPro Venus?
The maximum engraving speed of the LaserPro VENUS is 508 mm/sec (20 inches/sec).
advertisement