3219 Manuals

Lennox CLIMATIC 10 MODBUS OPTION

Manuals and User Guides for Lennox CLIMATIC 10 MODBUS OPTION. We found 1 manuals for free downloads User manual

Below you will find brief information for CLIMATIC 10 MODBUS OPTION. This user manual discusses how to configure the CLIMATIC 10 for use with a MODBUS network, which allows you to control one or more units through the CLIMATIC 10 to a BMS system using a single network. The manual includes wiring diagrams and instructions for setting up the CLIMATIC 10 and GATEWAY, along with a detailed address map for the MODBUS network.

Key Features

Connect up to 16 units with the CLIMATIC 10 thermostat to the same interface
Connect up to 16 GATEWAYs in the same net
Control units through the CLIMATIC 10 to a BMS system
Control various functions of the unit such as setpoints, alarms, and fan modes
Use a MODBUS network for communication
Install different controllers and devices on the same MODBUS network
Configure the GATEWAY for reading and writing specific parameters
Read and write digital and analogic addresses using MODBUS functions
Block the keypad of the CLIMATIC 10 remotely
Monitor inlets/outlets status

Pages: 8 Lennox CLIMATIC 10 MODBUS OPTION User manual

Brand: Lennox Category: Home security & automation Size: 154 KB

Languages: English

Open manual

Frequently Answers and Questions

How is the CLIMATIC 10 net composed?

The CLIMATIC 10 net is composed of one or more units connected to a BMS system using the GATEWAY interface. This interface allows for a network of CLIMATIC 10 units to communicate using the MODBUS protocol. You can connect up to 16 units with the CLIMATIC 10 thermostat and up to 16 GATEWAYs in the same network.

What can be switched on to this net?

You can control various functions of the unit through the CLIMATIC 10 net, including selection of mode of functioning, modification of setpoints, reading alarm status and resetting alarms, reading air ambient temperature, condensing temperature, and outdoor ambient temperarture, reading inlets/outlets status, registering hours of functioning for compressor and fans, and keypad blocking/unblocking.

What is the function of the GATEWAY in the CLIMATIC 10 net?

The GATEWAY serves as an interface between the CLIMATIC 10 units and the BMS system. It allows communication between the units and the BMS using the MODBUS protocol. It also handles the configuration of communication parameters between the CLIMATIC 10 units and the BMS system.