Louet Spring 1 - Adding Harness
Manuals and User Guides for Louet Spring 1 - Adding Harness. We found 1 manuals for free downloads Instructions
Below you will find brief information for Spring loom shaft extension kit. This manual guides you through adding 4 shafts to your Spring loom, including steps like removing the beater, screwing treadles, mounting new treadles with axles and spacers, replacing nylon tubes with rollers, and adjusting cord tension using Texsolv pegs. It covers attaching shaft bars, lams, and heddles, ensuring proper setup for weaving.
Key Features
Adds 4 shafts to Spring loom
Includes screws, axles, spacers for treadle assembly
Uses Texsolv cords for tension adjustment
Replaces nylon tubes with rollers on axles
Guides cord connection and tension setup
Covers attaching shaft bars and lams
Pages: 4 Louet Spring 1 - Adding Harness Instructions
Brand: Louet Size: 924 KB
Languages: English
Open manualFrequently Answers and Questions
How do I adjust the tension of the new cords?
Choose the cord loop to insert the Texsolv peg into. Release tension by taking the cord from a roller, adjust, then reattach and judge tension—higher tension needs more power, low tension may cause cords to slip.
What if I don’t have extra heddles for the new shafts?
You must take heddles from the other shafts on the loom, as the kit doesn’t include heddles (determined by warp yarn count).
How do I find the original screw thread when reassembling supports?
Turn the screw counter-clockwise while pushing it in until you feel it drop into the existing thread, then fasten clockwise.
How do I mount the new treadles to existing ones?
Use an axle, nylon spacer, mounting block, and big screw to mount two new treadles at both sides of each existing treadle.
advertisement