127 Manuals

Luxman B-1000 f

Manuals and User Guides for Luxman B-1000 f. We found 1 manuals for free downloads Owner's manual

Below you will find brief information for Control Amplifier C-1000f, Control Amplifier C-600, Phono Stage E-1, Phono Stage E-600, Phono Stage EQ-88, Phono Stage MT-88, Phono Stage OPEQ-88, Control Amplifier B-1000f, Amplifier M-800A, Amplifier M-600A. The Luxman C-1000f Control Amplifier is a high-quality audio component that offers a wide range of features and functions. It can be used with a variety of audio sources, including CD players, SACDs, DVD-Audio players, turntables, and tuners. The C-1000f features balanced inputs and outputs, a remote control, and a variety of other features that make it a versatile and powerful audio component. It can be used to create a high-quality home theater system, or simply to enjoy music in a dedicated listening room.

Key Features

Balanced inputs & outputs
Remote control
Stand-by / Operate Switch
Input Selector
Volume Control and monitor switch
Output Mode & Balanced Invert
Main power switch and signal ground post
Remote Output RJ-11 (two) Phase-line sensor
AC inlet

Luxman C-1000f Control Amplifier Owner's Manual

Pages: 28 Luxman B-1000 f Owner's manual

Brand: Luxman Category: Musical Equipment Size: 1 MB

Languages: English

Open manual

Frequently Answers and Questions

What is the purpose of the GROUND POST on the rear panel?

The GROUND POST accepts a ground wire from an external phono stage. This terminal does not have to be used, but you may connect it to a suitable ground on an amplifier for example, which under some circumstances will reduce hum and ripple.

When should I use the Balanced Input on the C-1000f?

The balanced input is desirable for minimizing earth loop generated mains hum and ripple, or high frequency interference, if a noise problem occurs.

How do I connect a subwoofer to the C-1000f?

You can connect a subwoofer to the C-1000f using either the Speaker (High Level) or the Preamplifier (Line Level) connection. For the Speaker Level connection, use a speaker cable to connect the Speaker Terminals to the Speaker terminal INPUT on the Subwoofer. For the Preamplifier Level connection, use an RCA cable to connect the L OUTPUT on the C-1000f's to the L INPUT on your subwoofer and repeat the process for the R channel.

What is the purpose of the REMOTE CONTROL TRIGGER on the rear panel?

The REMOTE CONTROL TRIGGER generates a 12 volt DC trigger signal which will activate a LUXMAN B-1000f, M-800A or M-600A. It toggles between Stand-By and Operate. Uses a simple RJ-11 connector (normally used for the phone lines).