1. manualzz.com
  2. industrial & lab equipment
  3. electrical equipment & supplies

M-system M2DYH2

Инструкции и руководства для M-system M2DYH2. Мы нашли 1 инструкции доступные для бесплатного скачивания instruction manual

Below you will find brief information for Current loop supply M2DYH2. This device acts as a signal conditioner, converting an input current loop signal of 4-20mA to a corresponding output voltage or current. It's ideal for use in industrial applications where accuracy and reliability are paramount. The M2DYH2 also features HART communication capabilities for enhanced data transmission and diagnostics.

Ключевые особенности

  • HART communication
  • 4-20 mA current loop input
  • Output signal conditioning
  • DIN rail mounting
  • Wall mounting
  • Easy calibration
  • Accuracy and reliability

Страниц: 2 M-system M2DYH2 instruction manual

Бренд: M-system Категория: Electrical equipment & supplies Размер: 388 KB

Языки: English

Открыть мануал

Часто задаваемые вопросы

What environmental conditions are suitable for the M2DYH2?
The M2DYH2 can operate within an environmental temperature range of -5 to +55°C (-23 to +131°F) and relative humidity between 30 to 90% RH. It's important to ensure adequate ventilation and avoid installation in areas with heavy dust or metal particles.
How do I install the M2DYH2?
The M2DYH2 can be installed on a DIN rail or on a wall. For DIN rail mounting, simply slide the base socket onto the rail and secure it. For wall mounting, use the provided mounting holes. Ensure the ventilation slits aren't covered by cables or other objects.
How do I calibrate the M2DYH2?
While the M2DYH2 comes factory calibrated, you can adjust the output signal. Use a signal source and measuring instruments to apply 0% input and adjust the output to 0% for the Zero adjustment. Then apply 100% input and adjust the output to 100% for the Span adjustment. Check the Zero adjustment again with 0% input. Repeat the steps if the Zero value changes.

реклама