885 Manuals

M-system M5 PT

Manuals and User Guides for M-system M5 PT. We found 1 manuals for free downloads instruction manual

Below you will find brief information for PT Transmitter M5 PT. The M5 PT is a PT Transmitter designed to function as soon as power is supplied, however, a warm up for 10 minutes is required for satisfying complete performance described in the data sheet. The unit is calibrated at the factory to meet the ordered specifications. It is designed for indoor use and must be installed in areas with sufficient ventilation, away from heat sources and vibration.

Key Features

DIN Rail Mountable
Adjustable Output
Calibration at Factory
10-Minute Warm-Up
Surge Protection
Indoor Use
Environmental Temperature Resistance
Vibration Resistance

M5 PT Instruction Manual - PT Transmitter M5 PT

Pages: 2 M-system M5 PT instruction manual

Brand: M-system Category: Electrical equipment & supplies Size: 123 KB

Languages: English

Open manual

Frequently Answers and Questions

How do I mount the M5 PT on a DIN rail?

Hang the upper hook at the rear side of the unit on the DIN rail and push in the lower in keeping pressing the unit to the DIN rail.

What is the power input rating for the M5 PT?

The power input rating is 85 – 264V AC or 24V DC. For the 85 – 264V AC rating, the operational range is 85 – 264V, 47 – 66 Hz, with an approximate power consumption of 2 – 3VA. For the 24V DC rating, the operational range is 24V ±10% with an approximate power consumption of 2W.

How do I calibrate the output signal of the M5 PT?

Apply 10% input and adjust the output to 10% to set the zero point. Then apply 100% input and adjust the output to 100% to set the span. Check the zero adjustment again with 10% input. If the zero value changes, repeat the process.