885 Manuals

M-system MXF

Manuals and User Guides for M-system MXF. We found 1 manuals for free downloads instruction manual

Below you will find brief information for Signal Transmitter MXF. This device is a signal transmitter with various features, including input range selection, output range selection, display range scaling, and moving average adjustments. It is designed to function as soon as power is supplied. You can use this device to transmit signals from various sources to other devices.

Key Features

Input range selection
Output range selection
Display range scaling
Moving average
Reset all settings
Programmable
DIN Rail mounting
Wall mounting
Error indication
Calibration procedure

Signal Transmitter MXF Instruction Manual

Pages: 4 M-system MXF instruction manual

Brand: M-system Category: Electrical equipment & supplies Size: 436 KB

Languages: English

Open manual

Frequently Answers and Questions

How to program the device?

To program the device, you will need to set the unit into Program Mode by setting ITEM 01 – DATA 2 to 2. Then use ITEM UP or DOWN key to choose the ITEM you need to change and use DATA UP or DOWN key to choose the DATA value you need.

How to reset all settings of the device?

To reset all settings, set the unit to Reset Mode by setting ITEM 01 – DATA 3 to 3, then choose ITEM 24 – DATA 1 and double-click DATA DOWN key to enable reset. After the initialization is complete, you can set the unit to Monitor Mode.

How to select input range of the device?

To select input range, you need set the unit into Program Mode, then choose ITEM 19 – DATA and set 0% input voltage, and choose ITEM 20 – DATA and set 100% input voltage. Then set the unit into Monitor Mode.

How to select output range of the device?

To select the output range, you need to set the unit to Program Mode, then choose ITEM 21 – DATA and set 0% output voltage, and choose ITEM 22 – DATA and set 100% output voltage. Then set the unit to Monitor Mode.

How to calibrate the device?

To calibrate the device, warm up the unit for at least 10 minutes, then apply 0%, 25%, 50%, 75% and 100% input signal. Check the output signal for each input signal. If the output is out of tolerance, you can recalibrate the unit by adjusting ITEM 07 and 08.