1. manualzz.com
  2. computers & electronics
  3. networking
  4. gateways/controllers

MICRORISC GW-USB-03A

Manuals and User Guides for MICRORISC GW-USB-03A. We found 1 manuals for free downloads User's Guide

Below you will find brief information for IQRF USB Gateway GW-USB-03A. The IQRF USB Gateway GW-USB-03A is a device that connects to a computer and a network of sensors and actuators. It can be used to monitor and control various aspects of a home or building, and to interact with it through a computer. This device has several key features that make it unique.

Key Features

  • Interface between IQRF network and PC
  • PC connectivity via USB (2 classes)
  • Bidirectional RF communication
  • High performance
  • TR module programming via USB and IQRF IDE
  • Sleep mode for low power consumption
  • EEPROM memory
  • Pushbutton for mode switching and factory setup
  • LED RGB
  • Beeper for acoustic indication

Pages: 7 MICRORISC GW-USB-03A User's Guide

Brand: MICRORISC Category: Gateways/controllers Size: 185 KB

Languages: English

Open manual

Frequently Answers and Questions

What is the GW-USB-03A?
The GW-USB-03A is an IQRF gateway with USB connectivity. It is designed to be an interface between an IQRF network and a PC. It is a revised version of the GW-USB-03 with completely redesigned hardware.
What are the key features of the GW-USB-03A?
The GW-USB-03A features IQRF-PC interface, USB connection, home automation capabilities, TR module and internal antenna, diagnostic tools, TR module programming through USB and IQRF IDE, bidirectional RF communication, high performance, 8-bit microcontroller with firmware upgrade bootloader, LED, buzzer, EEPROM memory, backup accumulator, and low power consumption.
What is the purpose of the GW-USB-03A?
The GW-USB-03A is used to connect an IQRF network to a PC. This allows for monitoring and control of devices on the network, as well as for programming the TR module that is also integrated into the device.
How do I use the GW-USB-03A?
The GW-USB-03A can be used in conjunction with the IQRF IDE to program the internal TR module and to communicate with other devices on the network. It can also be used with custom PC programs to achieve specific functionality.
How do I upgrade the firmware of the GW-USB-03A?
The GW-USB-03A has a bootloader that allows for firmware upgrades. Refer to IQRF Application note AN008 – Firmware upgrade for details.
Can the GW-USB-03A be used for home automation?
Yes, the GW-USB-03A can be used for home automation. Its TR module can be programmed to control various actuators, such as lights, motors, and thermostats.
What is the difference between the GW-USB-03A and the GW-USB-03?
The GW-USB-03A is a revised version of the GW-USB-03 with completely redesigned hardware. It offers the same functionality but with improved performance and additional features.

advertisement