MICRORISC GW-USB-13

Manuals and User Guides for MICRORISC GW-USB-13. We found 1 manuals for free downloads User's Guide

Below you will find brief information for IQRF USB Gateway GW-USB-13. This gateway provides a connection between a USB port and an IQRF network. It features an OLED display for visualizing and setting up parameters in a given application. You can use it to control home automation systems, portable controllers, and pagers. It also serves as a diagnostic tool and a portable service tool for IQRF network management.

Key Features

  • USB v2.0 interface
  • OLED display
  • 8b microcontroller
  • EEPROM memory
  • IQRF transceiver module
  • Backup accumulator
  • Very low power consumption in Sleep mode

Pages: 6 MICRORISC GW-USB-13 User's Guide

Brand: MICRORISC Category: Networking Size: 178 KB

Languages: English

Open manual

Frequently Answers and Questions

What is the GW-USB-13?
The GW-USB-13 is an IQRF gateway with USB connectivity and an OLED display. It provides an interface between a USB port and an IQRF network.
What are some applications for the GW-USB-13?
The GW-USB-13 has a variety of applications, including home automation, portable controllers, pagers, and diagnostic tools. It can also be used as a portable service tool for IQRF network management.
How is the GW-USB-13 powered?
The GW-USB-13 is typically powered via a micro USB connector, either from a PC or an adapter. The on-board accumulator provides backup power and can be charged from the external power source.
What kind of antenna does the GW-USB-13 use?
The GW-USB-13 uses a built-in PCB antenna module board. This antenna must be soldered by the user before the device can be used.
How is the GW-USB-13 software developed?
The GW-USB-13 software is developed using the DS-PAGER development set, which includes detailed information for designers.

advertisement