MIMAKI UJV55-320
Manuals and User Guides for MIMAKI UJV55-320. We found 6 manuals for free downloads Manual, Operation manual, Product information, Quick start Guide
Mimaki UJV55-320 Operation Manual
Brand: MIMAKI Category: Large format printers Size: 26 MB Pages: 136
Languages: English
Table of contents
- 15 About installing this machine
- 15 Where to Install This Machine
- 15 Working Environmental Temperature
- 15 About fixing machine
- 15 Moving This Machine
- 15 Names of Parts and Functions
- 15 Front Side of the Machine
- 15 Rear Side and Right Side of the Machine
- 15 Operation Panel
- 15 Pre-Heater
- 15 Media sensor
- 15 Carriage
- 15 Capping station
- 15 Pinch rollers and Feed rollers
- 15 Connecting Cables
- 15 Connecting USB2.0 Interface Cable
- 15 Connecting the LAN cable
- 15 Connecting Power Supply Cable
- 15 Fill ink in the ink tank and charging
- 15 Caution in handling of ink bottles
- 15 Media
- 15 Usable sizes of media
- 15 Caution in handling of medias
- 16 Workflow
- 16 Turning the Power ON/OFF
- 16 Turning the Power ON
- 16 Turning the Power OFF
- 16 Setting a Media
- 16 Adjusting the Head Height and Jam sensor Height
- 16 Note for media setting
- 16 Setting a roll media
- 16 Use the image quality confirmation LED light to check the print
- 16 Setting a narrow roll media
- 29 (twin rolls)
- 29 Setting media by using the narrow take-up device
- 29 Setup to “OFF
- 29 position to remove the roll shaft
- 29 Set media by using the narrow take-up device
- 29 Set media by using the narrow take-up device (twin rolls)
- 29 Setting leaf media
- 29 Removing the taken-up media
- 29 Changing the printing origin
- 29 Preparing for the Heaters
- 29 Changing the Temperature Settings for the Heaters
- 29 Test Printing
- 29 Head Cleaning
- 29 About head cleaning
- 29 Perform head cleaning depending on the test printing result
- 29 Setting of Media Correction
- 29 Setting of Media Correction
- 29 Correct the ink drop position for bidirectional printing
- 29 Printing Data
- 29 Starting a Printing Operation
- 29 Stopping a Printing Operation
- 29 Deleting Received Data (Data Clear)
- 30 About Setup MENU
- 30 Setup MENU table
- 30 Register the optimal print conditions to match the use
- 30 Setting of Media Correction
- 30 If the Positions of Dots Shift
- 30 Setting the Heater
- 30 Setting of Logical Seek
- 30 Setting of Overprint
- 30 Setting of Left and Right Margins
- 30 Setting of UV mode
- 30 Setting of Refresh
- 30 Setting of Vacuum Fan
- 30 Setting of Print Speed
- 30 Setting of MAPS
- 30 Setting Auto Cleaning
- 30 Setting Interval wiping
- 30 Setting of LT mode
- 30 About Machine Setup MENU
- 30 Machine Setup MENU table
- 30 Setting a AUTO Power-off
- 30 Setting Feeding unit
- 30 Setting Take-up unit
- 30 Setting the Display of Media Remain
- 30 Setting Time
- 82 Setting Unit (Temperature/ Length)
- 82 Setting a Key Buzzer
- 82 Setting the Display of Media Detection
- 82 Setting the CONFIRM. FEED
- 82 Set the network
- 82 Setting event mail function
- 82 Setting the Setting Lock function
- 82 Initializing the Settings
- 82 About Nozzle Check MENU
- 82 Nozzle Check MENU table
- 82 Printing Check Flow
- 82 Occurrence
- 82 Setting the Printing Check
- 82 Setting the Auto Nozzle Recoverry
- 82 Setting the Judgement Condition
- 82 About Information MENU
- 82 Information MENU table
- 82 Displaying the Information
- 82 Displaying the Information of this machine
- 82 Setting a Language
- 83 Maintenance
- 83 Precautions for Maintenance
- 83 About Cleaning Solution
- 83 Cleaning the Exterior Surfaces
- 83 Cleaning the Platen
- 83 Image quality confirmation LED Light
- 83 Cleaning the Media Sensor
- 83 Cleaning the Media Press
- 83 About Maintenance MENU
- 83 Maintenance MENUs at-a-glance
- 83 Maintaining the Capping Station
- 83 Cleaning the Wiper and Cap
- 83 Washing the Ink Discharge Passage
- 83 Cleaning the Ink Head and the Area around It
- 83 When nozzle missing Cannot Be Solved
- 83 Washing the Head Nozzle
- 83 Nozzle Recovery Function
- 83 Automatic Maintenance Function
- 83 Setting the Refreshing level
- 83 Setting the Cleaning level
- 83 Setting the Cleaning level for White ink
- 83 About white ink circulation function
- 83 Discarding waste ink
- 83 For waste ink remaining management
- 83 Adjust the waste ink
- 83 Replacing consumables
- 83 Replacing the wiper
- 110 Replacing the Mist Fan Filter (H fan filter)
- 110 Replace the ink tank and ink fillter
- 110 Tank Calibration
- 110 Replacing the cap absorber
- 110 Refilling antifreeze mixed water
- 110 Refill antifreeze mixed water
- 111 Troubleshooting
- 111 Power does not turn on
- 111 The machine does not start printing
- 111 Media get jammed / media is soiled
- 111 Image quality is poor
- 111 Nozzle is clogged
- 111 Ink tank warning appears
- 111 When the ink leakage occurs
- 111 If an error related to the Sub Tank occurs (Error 618 to 61b)
- 111 If nozzle missing due to color mixture of ink or aeration
- 111 When media heaves up at feeding
- 111 Warning / Error Messages
- 111 Warning messages
- 111 Error messages
- 112 Specifications
- 112 Machine specifications
- 112 Ink specifications
- 112 Supply item list
- 112 Setting orders of ink tanks
- 112 Sheet for inquiry
MIMAKI UJV55-320 Quick Start Manual
Brand: MIMAKI Size: 270 KB Pages: 6
Languages: English
Open in a new tab
Mimaki UJV55-320 Operation Manual
Brand: MIMAKI Category: Large format printers Size: 27 MB Pages: 136
Languages: English
Table of contents
- 15 About installing this machine
- 15 Where to Install This Machine
- 15 Working Environmental Temperature
- 15 About fixing machine
- 15 Moving This Machine
- 15 Names of Parts and Functions
- 15 Front Side of the Machine
- 15 Rear Side and Right Side of the Machine
- 15 Operation Panel
- 15 Pre-Heater
- 15 Media sensor
- 15 Carriage
- 15 Capping station
- 15 Pinch rollers and Feed rollers
- 15 Connecting Cables
- 15 Connecting USB2.0 Interface Cable
- 15 Connecting the LAN cable
- 15 Connecting Power Supply Cable
- 15 Fill ink in the ink tank and charging
- 15 Caution in handling of ink bottles
- 15 Media
- 15 Usable sizes of media
- 15 Caution in handling of medias
- 16 Workflow
- 16 Turning the Power ON/OFF
- 16 Turning the Power ON
- 16 Turning the Power OFF
- 16 Setting a Media
- 16 Adjusting the Head Height and Jam sensor Height
- 16 Note for media setting
- 16 Setting a roll media
- 16 Use the image quality confirmation LED light to check the print
- 16 Setting a narrow roll media
- 29 (twin rolls)
- 29 Setting media by using the narrow take-up device
- 29 sition to remove the roll shaft
- 29 Set media by using the narrow take-up device
- 29 Set media by using the narrow take-up device (twin rolls)
- 29 Setting leaf media
- 29 Removing the taken-up media
- 29 Changing the printing origin
- 29 Preparing for the Heaters
- 29 Changing the Temperature Settings for the Heaters
- 29 Test Printing
- 29 Head Cleaning
- 29 About head cleaning
- 29 Perform head cleaning depending on the test printing result
- 29 Setting of Media Correction
- 29 Setting of Media Correction
- 29 Correct the ink drop position for bidirectional printing
- 29 Printing Data
- 29 Starting a Printing Operation
- 29 Stopping a Printing Operation
- 29 Deleting Received Data (Data Clear)
- 30 About Setup MENU
- 30 Setup MENU table
- 30 Register the optimal print conditions to match the use
- 30 Setting of Media Correction
- 30 If the Positions of Dots Shift
- 30 Setting the Heater
- 30 Setting of Logical Seek
- 30 Setting of Overprint
- 30 Setting of Left and Right Margins
- 30 Setting of UV mode
- 30 Setting of Refresh
- 30 Setting of Vacuum Fan
- 30 Setting of Print Speed
- 30 Setting of MAPS
- 30 Setting Auto Cleaning
- 30 Setting Interval wiping
- 30 Setting of LT mode
- 30 About Machine Setup MENU
- 30 Machine Setup MENU table
- 30 Setting a AUTO Power-off
- 30 Setting Feeding unit
- 30 Setting Take-up unit
- 30 Setting the Display of Media Remain
- 30 Setting Time
- 82 Setting Unit (Temperature/ Length)
- 82 Setting a Key Buzzer
- 82 Setting the Display of Media Detection
- 82 Setting the CONFIRM. FEED
- 82 Set the network
- 82 Setting event mail function
- 82 Setting the Setting Lock function
- 82 Initializing the Settings
- 82 About Nozzle Check MENU
- 82 Nozzle Check MENU table
- 82 Printing Check Flow
- 82 Setting the Printing Check
- 82 Setting the Auto Nozzle Recoverry
- 82 Setting the Judgement Condition
- 82 About Information MENU
- 82 Information MENU table
- 82 Displaying the Information
- 82 Displaying the Information of this machine
- 82 Setting a Language
- 83 Maintenance
- 83 Precautions for Maintenance
- 83 About Cleaning Solution
- 83 Ink Maintenance
- 83 Cleaning the Exterior Surfaces
- 83 Cleaning the Platen
- 83 Image quality confirmation LED Light
- 83 Cleaning the Media Sensor
- 83 Cleaning the Media Press
- 83 About Maintenance MENU
- 83 Maintenance MENUs at-a-glance
- 83 Maintaining the Capping Station
- 83 Cleaning the Wiper and Cap
- 83 Washing the Ink Discharge Passage
- 83 Cleaning the Ink Head and the Area around It
- 83 When nozzle missing Cannot Be Solved
- 83 Washing the Head Nozzle
- 83 Nozzle Recovery Function
- 83 Automatic Maintenance Function
- 83 Setting the Refreshing level
- 83 Setting the Cleaning level
- 83 Setting the Cleaning level for White ink
- 83 About white ink circulation function
- 83 Discarding waste ink
- 83 For waste ink remaining management
- 83 Adjust the waste ink
- 83 Replacing consumables
- 110 Replacing the wiper
- 110 Replacing the Mist Fan Filter (H fan filter)
- 110 Replace the ink tank and ink fillter
- 110 Tank Calibration
- 110 Replacing the cap absorber
- 110 Refilling antifreeze mixed water
- 110 Refill antifreeze mixed water
- 111 Troubleshooting
- 111 Power does not turn on
- 111 The machine does not start printing
- 111 Media get jammed / media is soiled
- 111 Image quality is poor
- 111 Nozzle is clogged
- 111 Ink tank warning appears
- 111 When the ink leakage occurs
- 111 If an error related to the Sub Tank occurs (Error 618 to 61b)
- 111 If nozzle missing due to color mixture of ink or aeration
- 111 When media heaves up at feeding
- 111 Warning / Error Messages
- 111 Warning messages
- 111 Error messages
- 112 Specifications
- 112 Machine specifications
- 112 Ink specifications
- 112 Supply item list
- 112 Setting orders of ink tanks
- 112 Sheet for inquiry
Mimaki UJV55-320 Operation Manual
Brand: MIMAKI Size: 3 MB Pages: 28
Languages: English, Japanese
Open in a new tab
Mimaki UJV55-320 Manual
Brand: MIMAKI Size: 1 MB Pages: 2
Languages: English, Japanese
Open in a new tab