525 Manuals

MSD FI Enhancer

Manuals and User Guides for MSD FI Enhancer. We found 3 manuals for free downloads Installation instructions

Below you will find brief information for FI Enhancer FI Enhancer. The MSD FI Enhancer is preprogrammed with four base fuel curves. These curves adjust fuel delivery based on throttle position and rpm, providing the right amount of fuel under all conditions. These four curves correspond to varying levels of performance modifications. In addition to the four curves, there are three potentiometers that allow you to fine tune the curve you select. These potentiometers allow you to adjust the fuel curve from +20% to -20% in three different rpm ranges.

Key Features

Preprogrammed fuel curves
Adjustable fuel delivery
Throttle position and RPM sensing
Potentiometer fine tuning
Easy installation
LED status indicator

Pages: 4 MSD FI Enhancer Installation instructions

Brand: MSD Category: Motor vehicle electronics Size: 1 MB

Languages: English

Open manual

Frequently Answers and Questions

How many base fuel curves are there?

The MSD FI Enhancer has four preprogrammed base fuel curves.

How do I adjust the fuel delivery?

You can adjust the fuel delivery using the potentiometers, which allow you to fine-tune the fuel curve in three different RPM ranges.

What does the LED indicate?

The LED illuminates when there is power to the FI Enhancer unit.

What to do if the LED does not come on?

If the LED doesn't come on, check the ground connection to the FI Enhancer. Make sure it's properly connected to the battery ground or a grounded lug on the frame.

What should I do if the FI Enhancer doesn't run on one or both cylinders?

Double check all connections at the injector, ensuring the connectors are seated properly.