13247 Manuals

Makita PC5001C

Manuals and User Guides for Makita PC5001C. We found 12 manuals for free downloads instruction manual, User's manual

The Makita PC5000C is a powerful and versatile concrete planer designed to tackle demanding concrete surfaces with ease. With its robust construction and advanced features, this tool delivers exceptional performance and user-friendly operation. Equipped with a 125mm wheel diameter and a powerful motor, the Makita PC5000C delivers a no-load speed of 10000 min-1, ensuring efficient and rapid material removal. Its overall length of 437mm and net weight of 4.0kg provide a balanced and maneuverable design, allowing for comfortable handling and precise control during operation. The Makita PC5000C is engineered with double insulation for enhanced operator safety, minimizing the risk of electric shock. It utilizes offset diamond wheels, specifically designed for grinding operations, delivering exceptional results on concrete surfaces. For added versatility, the tool can be connected to a dust extractor, enabling efficient dust collection and maintaining a clean work environment. To ensure user safety, the Makita PC5000C comes with various safety features, including a lock-on switch to prevent accidental startups and a spindle lock for quick and easy wheel changes. Additionally, the tool's ergonomic design reduces fatigue during prolonged use, enhancing overall user comfort and productivity. With its combination of power, precision, and safety features, the Makita PC5000C is an ideal choice for professionals and DIY enthusiasts alike, providing exceptional performance and versatility for a wide range of concrete planing applications.

Key Features

Constant speed control
Soft start
Dust extraction
Tilting base (PC5001C)
Level planing (PC5001C)
Base adjustment for wheel wear (PC5001C)

Makita PC5001C 5" Concrete Planer Instruction manual

Pages: 12 Makita PC5001C instruction manual

Brand: Makita Category: Power tools Size: 478 KB

Languages: English

Open manual

Frequently Answers and Questions

How do I adjust the stock removal amount on the Concrete Planer?

Loosen the hex socket head bolts on the base holder with the hex wrench. Raise or lower the front roller to adjust the gap between it and the diamond wheel. The difference is the stock removal amount. Then secure the hex socket head bolts very carefully.

What is the maximum stock removal amount for this Concrete Planer?

The maximum stock removal should be less than 4.0 mm.

How do I tilt the base on the PC5001C for smoother planing?

Use the hex wrench to loosen the two hex socket head bolts securing the base on either side. Use a hex wrench to lower the three hex socket head bolts on the base by turning them on the base clockwise. Adjust center of base near wheel so that it is on the same level as the wheel. Then secure carefully the hex socket head bolts on either side of the base. Adjust center of base near wheel so that it is on the same level as the wheel.

How do I replace the diamond wheel on the Concrete Planer?

Press in the shaft lock to hold the shaft steady, then loosen the lock nut counterclockwise with the lock nut wrench provided. Remove the worn diamond wheel. To install a new one, follow the above removal procedure in reverse. When installing a diamond wheel, always make sure to tighten the lock nut firmly.

What is the purpose of the dust cover's brush on the Concrete Planer?

The dust cover's brush helps to collect dust and debris during operation. Adjust the dust cover's brush level so it is either flush with the diamond wheel surface or very slightly above (when tool is inverted) 0.5 mm. Suction/pickup will be poor if they are not approximately on the same level.