Mirage M220021 H13
Manuals and User Guides for Mirage M220021 H13. We found 1 manuals for free downloads Owner's manual
Below you will find brief information for Propane Burnisher M220021H13. The Propane Burnisher M220021H13 is a powerful and versatile floor machine designed for polishing and burnishing hard-surface floors. It is equipped with a 13hp Honda engine and a 20lb propane tank for reliable operation. The machine is also equipped with a variety of features including an adjustable handle, a safety bail, and a pad driver that can be used with a variety of pads. This manual will guide you through the setup, operation, maintenance, and troubleshooting steps for your new burnisher.
Key Features
13hp Honda engine
20lb propane tank
Adjustable handle
Safety bail
Pad driver
Pages: 23 Mirage M220021 H13 Owner's manual
Brand: Mirage Category: Floor Machine Size: 819 KB
Languages: English
Open manualFrequently Answers and Questions
What kind of oil should I use in my propane burnisher?
Use premium quality motor oil with the API (American Petroleum Institute) designation SG on the container. Refer to Table 1 and Figure 1 on page 6 to determine the oil weight suitable for the temperature range you'll be operating in.
How often should I check the oil level?
Check the oil level twice a day or after every 4 hours of operation during the first 24 hours of operation. After that, check the oil level daily before starting the engine for the first time each day.
How do I change the oil in my propane burnisher?
- Run the engine for 5 minutes to warm the oil, then stop the engine by closing the service valve on the tank. 2. Locate the oil drain on the right side of the engine at its base. 3. Remove the cap on the oil drain tube. 4. Allow the oil to drain completely. 5. Replace the cap. 6. Remove the oil fill cap. 7. Add additional oil if necessary. 8. Replace the fill cap.
What should I do if my propane burnisher won't start?
Verify that the propane tank is full, the fuel line is connected to the vapor-withdrawal fitting on the LPG container, and the fuel shut-off valve is open. Check the engine oil level and add oil if necessary. Clean the air cleaner and replace the spark plugs if necessary.
advertisement