Mitutoyo Measuring Projector
Manuals and User Guides for Mitutoyo Measuring Projector. We found 1 manuals for free downloads User's manual
Below you will find brief information for PJ-A3000 Series PJ-A3000 Series Measuring Projector. This measuring projector is a versatile measuring microscope used for factory inspections, capable of precision measurement of workpiece dimensions, contours, and surface features. It features an optional cross-travel stage, easy-to-read counter display, and a quick bulb exchange mechanism. The PJ-A3000 series improves operability with switches placed at the front and right side of the main unit.
Key Features
Versatile measurement of dimensions, contours, and surface features.
Optional cross-travel stage with a maximum stroke of 200 x 100mm.
Easy-to-read counter display.
Quick bulb exchange mechanism.
Contour and reflective light source with 24V, 150W halogen bulb.
Improved operability with front and right side switches placement.
Pages: 97 Mitutoyo Measuring Projector User's manual
Brand: Mitutoyo Category: Microscopes Size: 3 MB
Languages: English
Open manualFrequently Answers and Questions
What is the purpose of the PJ-A3000 Series Measuring Projector?
It's a multi-purpose measuring microscope used for factory inspection, performing precision measurement of workpiece dimensions, contours, and surface features.
What type of illumination bulbs are used in the PJ-A3000 Series?
It uses a 24V, 150W halogen bulb with a life of approximately 500 hours for both contour and reflective light sources.
Where are the switches located to improve operability?
The switches are placed at the front and right side of the main unit.
What should I do if the system is under abnormal conditions?
Immediately turn off the power switch, then unplug the power plug from the outlet. Contact your dealer or the nearest Mitutoyo service network.
Questions & Answers
A A A
What is the correct procedure for turning on the PJ-A3000 Series Meetprojector, especially when peripheral equipment is connected via RS232C?
First, confirm that the input voltage matches the projector's rated voltage. If peripherals (like a PC) are connected, turn on the equipment in the following order to prevent error messages (E51, E52, E53) on the counter: 1. Peripheral equipment. 2. Projector main unit. Finally, operate the main power switch on the control panel.
advertisement