726 Manuals

Mobotix Q26 Hemispheric

Manuals and User Guides for Mobotix Q26 Hemispheric. We found 3 manuals for free downloads Manual, Quick Setup guide, installation Guide

Below you will find brief information for hemispheric camera Q26 Hemispheric. The Q26 Hemispheric is a 6MP dome camera with day or night image sensor designed for flexible use in indoor and outdoor applications. It features MxAnalytics, H.264 and ONVIF compatibility; recording on internal MicroSD card; audio integrated; sensor for temperature integrated; weatherproof and robust camera housing (IP66, IK06). It can be mounted to poles using Pole Mount accessory. The camera is simply mounted to walls or ceilings without accessories, with the On-Wall Set/On-Wall Set 10°, with Cavity Wall Installation Set or with the Outdoor Wall Mount.

Key Features

6MP dome camera
Day or night image sensor
MxAnalytics video analysis
H.264 and ONVIF compatibility
Recording on internal MicroSD card
Audio integrated
Sensor for temperature integrated
Weatherproof and robust camera housing
Simply mounted to poles using Pole Mount

Pages: 126 Mobotix Q26 Hemispheric Manual

Brand: Mobotix Category: Security cameras Size: 7 MB

Languages: English

Open manual

Frequently Answers and Questions

How do I activate the boot menu?

To activate the boot menu, briefly press the key by inserting a paper clip into the hole indicated by the red circle in the figure. The camera enters the boot menu, ready for selecting one of the boot options.

How do I adjust the lens focus?

If installed, remove the dome before proceeding. Using the lens wrench, carefully turn the lens in clockwise or counter-clockwise direction until the red area of the focusing aid is as small as possible. Check the live image from the camera in the browser and activate the focusing aid in the browser (Focusing Aid quick control, Activated value). Once the focus is adjusted properly, deactivate the focusing aid again (Focusing Aid quick control, Disabled value). Reinstall the dome, if required.

How do I insert or exchange the SD card?

Remove the back of the camera housing. If a MicroSD card has been installed, gently press with your finger as indicated by the arrow until you hear a click. Then release the SD card. The card is protruding slightly and can be easily removed. Insert the MicroSD card and gently press with your finger as indicated by the arrow until you hear another click. Make sure that the SD card is fully inserted. Install the back of the camera housing.