Multi-Tech rCell MTCBA-E1-EN2
Manuals and User Guides for Multi-Tech rCell MTCBA-E1-EN2. We found 1 manuals for free downloads User Guide
Below you will find brief information for Wireless Router rCell MTCBA-E1-EN2, Wireless Router rCell MTCBA-E1-EN2-GP, Wireless Router rCell MTCBA-G2-EN2, Wireless Router rCell MTCBA-G2-EN2-GP, Wireless Router rCell MTCBA-C1-EN2, Wireless Router rCell MTCBA-C1-EN2-GP, Wireless Router rCell MTCBA-H5-EN2, Wireless Router rCell MTCBA-H5-EN2-GP. Provides always-on connectivity for remote Ethernet devices, allowing for around the clock surveillance, monitoring, or real time data acquisition. These routers can also operate in wake-up on ring, for reduced costs, or dial-on demand mode to share internet access.
Key Features
Always-on connectivity
Wake-up on ring
Dial-on demand
Remote configuration
Ethernet II interface
GPS option
Cellular data connection
Power-on configuration
Modem AT Commands
Packet filters
Pages: 100 Multi-Tech rCell MTCBA-E1-EN2 User Guide
Brand: Multi-Tech Category: Routers Size: 2 MB
Languages: English
Table of contents
Open manualFrequently Answers and Questions
How do I configure the router for always-on connectivity?
The always-on network connection automatically establishes a wireless data connection. To configure this mode, you will need to access the web management software and set the desired parameters.
What is the purpose of the wake-up on ring mode?
The wake-up on ring mode allows the router to initiate a connection when it detects an incoming ring. This feature can help reduce costs associated with the modem being online continuously.
How do I set up the router for dial-on demand access?
When configured for dial-on demand, the router only accesses the Internet when data is present. This is ideal for sharing internet access among networked computers.
Can I use the router to access the internet with a VPN?
Yes, this router supports IPSec for secure VPN connections. Refer to the "IPSec" section in the web management software for configuration instructions.
How do I change the default password for the web management software?
You can change the default password by logging into the web management software and navigating to the "HTTP Configuration" section. From there you can update the username and password.
advertisement