NOSHOK KING-GAGE 5900

Manuals and User Guides for NOSHOK KING-GAGE 5900. We found 1 manuals for free downloads Manual

The NOSHOK KING-GAGE 5900 is a differential pressure transmitter that converts pneumatic pressure readings to a 4-20 mA output signal. This makes it suitable for process control applications or tank level gauging. This surface-mount transmitter is intended for control room or other protected locations and can be mounted within an enclosure.

Key Features

  • 4-20 mA output
  • Differential pressure measurement
  • Accuracy ± 0.20% FS (typical)
  • Multiple pressure ranges
  • Zero/span adjustment
  • DIP switch for range adjustment

Pages: 12 NOSHOK KING-GAGE 5900 Manual

Brand: NOSHOK Category: Power conditioning Size: 804 KB

Languages: English

Open manual

Frequently Answers and Questions

What pressure range does the KING-GAGE 5900 offer?
The KING-GAGE 5900 comes in pressure ranges of 0-5, 0-10, 0-15, 0-30, and 0-50 psid. The span can be adjusted from 70% to 140% of the nominal range.
How do I adjust the zero setting of the transmitter?
You can adjust the zero setting using the zero potentiometer on the transmitter board. Connect a multimeter to the test points on the board and adjust the potentiometer until the signal reads 4.00 mA.
What is the maximum load capacity of the transmitter?
The maximum load capacity depends on the supplied voltage. For example, with a 24 Vdc supply, the load capacity is 600 ohms.
Can I make adjustments to the zero setting in-process?
Yes, you can make adjustments to the zero setting while the transmitter is installed. Use a multimeter to measure the output and adjust the zero potentiometer as needed.

advertisement