929 Manuals

Nice Mindy A100F

Manuals and User Guides for Nice Mindy A100F. We found 2 manuals for free downloads Instructions, Manual

Below you will find brief information for Garage Door Opener mindy A100F. The mindy A100F is a control unit designed to automate garage doors and sliding gates with single-phase alternating-current gear motors. It has a force adjustment system and a 'constant resistance STOP' input for sensitive edges. Depending on the user's needs, the A100F offers programmable features that can be set through dipswitches, trimmers and a jumper. These features include semi-automatic, automatic and always close operation, condominium operation, pre-flashing, close after photo, safety during opening, gradual departure, deceleration and braking.

Key Features

Force adjustment system
Constant resistance STOP input
Programmable functions
Deceleration function
Phototest function

Garage Door Opener mindy A100F Instructions

Pages: 14 Nice Mindy A100F Instructions

Brand: Nice Category: Garage Door Opener Size: 278 KB

Languages: English

Open manual

Frequently Answers and Questions

What is the 'constant resistance STOP' input used for?

The 'constant resistance STOP' input is used to connect safety devices like sensitive edges, which have a constant resistance output of 8.2kΩ. It ensures that the door stops immediately and reverses briefly if the sensitive edge is triggered.

How do I adjust the working time for the door?

You can adjust the working time using the TL trimmer in the 'Semi-automatic' mode. Set the trimmer to half the travel distance, then run an opening and closing cycle. Adjust the trimmer until the door has enough time for the entire maneuver plus 2 to 3 seconds.

What is the 'Phototest' function?

The 'Phototest' function controls the efficiency of the photocell at the beginning of each maneuver. It helps ensure the safety device is working correctly by testing it before each operation.

What are the different operating modes available?

The A100F offers various operating modes: manual, semi-automatic, automatic, and automatic + always close. The operating mode can be selected using the dip switches.