1. manualzz.com
  2. home
  3. domestic appliances
  4. climate control
  5. weather stations

Nokeval 7470 V3.0

Manuals and User Guides for Nokeval 7470 V3.0. We found 1 manuals for free downloads Manual

Below you will find brief information for weather station WXT 520, analog output unit 7470 V3.0. This application note provides instructions on configuring the Nokeval 7470 analog output unit to interpret messages from Vaisala WMT and WXT weather sensors. It explains the process of configuring both devices, outlining the necessary steps and settings.

Key Features

  • Provides instructions on configuring Nokeval 7470 analog output unit
  • Outlines process of configuring both Nokeval 7470 and Vaisala WXT sensors
  • Covers supported Vaisala transmitters: WXT520, WXT510, WMT52, and WMT50
  • Includes flow chart for configuration based on equipment availability
  • Explains how to configure Vaisala with Vaisala Configuration Tool, terminal software, and Sicala
  • Details connecting the 7470 for RS-232/485 configuration
  • Provides step-by-step instructions on configuring the 7470
  • Includes wiring diagrams for connecting the Vaisala WXT520 and 7470

Pages: 14 Nokeval 7470 V3.0 Manual

Brand: Nokeval Category: Weather stations Size: 427 KB

Languages: English

Open manual

Frequently Answers and Questions

What equipment is needed to configure the Vaisala weather station?
You may use a Vaisala service cable or a regular RS232 or RS-485 connection for configuration. The Vaisala unit can be configured either using Vaisala configuration software or any terminal software like HyperTerminal or TeraTerm.
What equipment is needed to configure the Nokeval 7470?
The 7470 can be connected to the computer for configuration using a POL-RS232 or DCS772 programming cable. If no programming cable is available, the 7470 can be configured using RS-232 or RS-485 connection, but the jumper JP1 must be closed inside the 7470 during configuration. You will also need MekuWin configuration software.
How do I configure the Vaisala weather station to send the desired data?
You can use Vaisala Configuration Tool, terminal software, or Sicala to configure the Vaisala weather station. You need to select the parameters required for your application, define the composite message, and enable the automatic transmission.
How do I configure the Nokeval 7470 to receive and process the data from the Vaisala weather station?
You can use MekuWin software to configure the 7470. You need to define the desired field from the composite message coming from the weather station, scale the analog output signal, and configure the polarization.

advertisement