Olympus BX 41
Manuals and User Guides for Olympus BX 41. We found 7 manuals for free downloads instruction manual, Instructions, Operating instructions, User manual
Below you will find brief information for microscope BX BX41. The BX41 microscope features a UIS2/UIS (Universal Infinity System) optical system, built-in transmitted Koehler illumination, a 6V 30W halogen bulb, and a light intensity preset button. The stage height movement is by roller guide (rack & pinion) with a full stroke range of 25 mm. The BX41 can be used with up to two intermediate attachments.
Key Features
UIS2/UIS optical system
Built-in Koehler illumination
6V 30W halogen bulb
Interpupillary distance adjustment
Light intensity preset button
Roller guide stage with 25mm stroke range
Compatible with up to two intermediate attachments
Pages: 36 Olympus BX 41 instruction manual
Brand: Olympus Category: Microscopes Size: 731 KB
Languages: English
Table of contents
Open manualOther manuals and documents
Frequently Answers and Questions
What is the purpose of the pre-focusing lever?
The pre-focusing lever ensures that the objective does not come in contact with the specimen and simplifies focusing. After focusing on the specimen with the coarse adjustment knob, turn this lever in the direction of the arrow and lock; the upper limit on coarse adjustment movement is set at the locked position.
How do I adjust the condenser height?
Turn the condenser height adjustment knob to raise the condenser to its upper limit. Focus on the specimen using the 10X objective. Then, rotate the field iris diaphragm ring in the direction of the arrow so that the diaphragm image comes inside the field of view. Manipulate the condenser height adjustment knob to focus on the diaphragm image.
How do I change the bulb?
To replace the bulb, first set the main switch to "OFF" and disconnect the power cord from the wall outlet. Allow the lamp socket and bulb to cool before touching. Then, using the Allen screwdriver, loosen and remove the bulb holder retaining screw. Remove the burnt-out bulb and insert the new bulb in the lamp socket. Secure the bulb holder by tightening the screw. Finally, reconnect the power cord and turn the main switch to "ON".
Questions & Answers
U U Z
What type of lamp is required for the Olympus BX41 microscope?
The Olympus BX41 microscope requires a 6V 30W halogen bulb (PHILIPS 5761).
How is the lamp replaced in the Olympus BX41 microscope?
To replace the lamp, ensure the device is off and cooled. Carefully remove the old bulb. Handle the new 6V30WHAL (PHILIPS 5761) bulb with gloves, insert its pins straight and fully into the lamp socket, then align guide pins and push the assembly into place.
advertisement