Omnitracs MCP200
Manuals and User Guides for Omnitracs MCP200. We found 4 manuals for free downloads Installation instructions, Quick Reference manual, installation Guide, User Guide
Below you will find brief information for MCP110, MCP200, IVG. This document provides clear instructions for loading updated map data onto your Omnitracs MCP110, MCP200, and IVG units using a USB memory stick. It outlines crucial steps, including ensuring the correct software version, closing navigation applications, and important warnings to prevent data corruption. The process involves unit reboots and can take 20 to 90 minutes to complete, concluding with verification steps.
Key Features
Map data update capability for navigation systems
Supports Omnitracs MCP110, MCP200, and IVG units
Uses USB memory sticks for installation
Updates Omnitracs Navigation, ALK CoPilot Truck, and NaviGo applications
Provides detailed step-by-step installation instructions
Includes critical warnings against power loss or USB stick removal during update
Specifies installation times (20-40 mins for MCP, 60-90 mins for IVG)
Offers clear verification procedures for multiple navigation applications
Pages: 6 Omnitracs MCP200 Installation instructions
Brand: Omnitracs Size: 398 KB
Languages: English
Open manualOther manuals and documents
Frequently Answers and Questions
What is the purpose of this document?
This document provides instructions for loading updated map data on Omnitracs MCP110, MCP200, and IVG units using USB memory sticks.
What software version is required before starting the map update?
The current MCP software must be 14xx or newer.
How can I check the current software version?
You can check the software version by tapping the Home/System/Version buttons on your unit.
What should I avoid doing during the map installation?
You must NOT remove power or the USB memory stick during the map installation.
What should I do if the unit loses power during the upgrade?
If the unit loses power during the upgrade, you should start the process over by removing the USB stick and reinserting it after the unit has completed powering up.
How long does the map installation take for MCP110 and MCP200 units?
The installation process for MCP110 and MCP200 units takes approximately 20 to 40 minutes to complete.
How long does the map installation take for IVG units?
The installation process for IVG units can take from 60 to 90 minutes.
How do I verify the installation for Omnitracs Navigation?
To verify the installation, tap Navigation from the home screen, then Menu, Settings, and About. Ensure the correct version is displayed just under the Omnitracs logo on the About page.
advertisement