19 Manuals

Onboard Systems AS350 528-023-01

Manuals and User Guides for Onboard Systems AS350 528-023-01. We found 1 manuals for free downloads Manual

Below you will find brief information for cargo hook AS350 528-023-01, cargo hook AS350 528-029-00. This bulletin describes potential issues with manual release cable and bumper kits used with the AS350 series cargo hooks and provides instructions for inspection and replacement of these components. It includes detailed steps on how to check and replace the manual release cable, as well as how to install the bumper kit.

Key Features

Manual release cable configuration check
Manual release cable replacement
Cargo hook bumper installation
Cargo hook rigging
Manual release system function verification
Safe operation of manual release cable
Load release mechanism
Cargo hook load beam
Manual release lever
Cargo Swing and Cargo Sling installations

AS350 Cargo Hook Replacement Kits - Manual Release Cable & Bumper

Pages: 8 Onboard Systems AS350 528-023-01 Manual

Brand: Onboard Systems Category: Signal cables Size: 353 KB

Languages: English

Open manual

Frequently Answers and Questions

What is the purpose of the bumper kit?

The bumper kit prevents damage to the manual release cable as the cargo hook moves. Damage to the cable could cause the conduit to kink or separate, leading to an inadvertent load release. The bumper is only necessary for Cargo Swing installations, not for Cargo Sling installations.

How do I identify the correct manual release cable?

Onboard Systems release cables can be identified by the part number marking on the cable housing. If P/N 268-024-00 or 268-024-02 is already installed, you can skip to step 3. If any other configuration is installed, you need to replace it with P/N 268-024-02.

How do I verify the manual release system function?

Pull the release lever in the cockpit and ensure the cargo hook load beam falls open. This will verify the manual release system is functioning correctly.