Overland Storage DX1 SnapServer DX1

Manuals and User Guides for Overland Storage DX1 SnapServer DX1. We found 1 manuals for free downloads Quick start Guide

Below you will find brief information for Storage Appliance SnapServer DX1. The SnapServer DX1 is a 1U storage appliance that can be used to store and manage data for a variety of purposes. The SnapServer DX1 supports up to four disk drives, which can be installed individually or in four-packs. The SnapServer DX1 can be managed using the SnapServer Manager (SSM) application, which provides a single interface for discovering and managing all SnapServers on the network. The SnapServer DX1 can be configured to acquire an IP address from a DHCP server or you can assign an IP address manually.

Key Features

  • 1U Storage Appliance
  • Supports up to 4 disk drives
  • Managed by SnapServer Manager (SSM)
  • Dual Ethernet ports for load balancing or failover
  • Auto-sensing 10/100/1000Base-T network connections
  • Supports APC-brand USB or network-based UPS devices
  • Warranty and technical support available online
  • Initial setup wizard

Pages: 2 Overland Storage DX1 SnapServer DX1 Quick start Guide

Brand: Overland Storage Category: Network switches Size: 438 KB

Languages: English

Open manual

Frequently Answers and Questions

What is the SnapServer DX1 and what is it used for?
The SnapServer DX1 is a 1U storage appliance designed to store and manage data for a variety of purposes, such as file sharing, backup and recovery, and disaster recovery.
How many disk drives can be installed in a SnapServer DX1?
The SnapServer DX1 supports up to four disk drives, which can be installed individually or in four-packs.
How do I manage the SnapServer DX1?
The SnapServer DX1 can be managed using the SnapServer Manager (SSM) application, which provides a single interface for discovering and managing all SnapServers on the network.
How do I activate my warranty for the SnapServer DX1?
To activate your warranty, go to the Overland Storage website and register your product. You will need to provide your email address and password, as well as the serial number of your SnapServer DX1.
How do I connect the SnapServer DX1 to my network?
The SnapServer DX1 can be connected to your network using a Category 5e (or better) cable. Connect the Ethernet 1 port on the appliance to a Gigabit Ethernet switch on the same LAN as the host system used to manage the SnapServer DX1.

advertisement