264 Manuals

Overland Storage SnapServer DX2

Manuals and User Guides for Overland Storage SnapServer DX2. We found 11 manuals for free downloads Manual, installation Guide, Quick start Guide, Instructions, Instructions manual

Overland Storage SnapServer DX2 is a versatile storage solution designed to provide reliable and scalable data management for various applications. With its hot-swappable drive bays, you can seamlessly add or replace drives without interrupting operations, ensuring continuous data availability. The device's RAID support enhances data protection by creating redundant copies of your valuable information, safeguarding it against drive failures.

Key Features

High-performance storage
Scalable capacity
Reliable and secure
Easy to manage
Integration with NetBackup
Cost-effective backup solution
Disaster recovery capabilities

Overland Storage SnapServer DX2 Upgrade Instructions

Pages: 5 Overland Storage SnapServer DX2 Manual

Brand: Overland Storage Category: Car kits Size: 4 MB

Languages: English

Open manual

Frequently Answers and Questions

What are the required tools and files for installing NetBackup 6.5 on a SnapServer DX1 or DX2?

You will need to have the IP addresses of the backup and media servers, a Unix/Linux client, an SSH client, the backup and restore path location, and the NetBackup 6.5 client and server installers in the form of GSU files.

How do I install the NetBackup 6.5 client on a SnapServer DX1 or DX2?

Download the GSU file for the NetBackup 6.5 client from Overland Storage and upload it to the SnapServer using the Web Management Interface. Connect to the SnapServer over SSH and run the client installer.

How do I install the NetBackup 6.5 server on a SnapServer DX1 or DX2?

You need to install two components: Symantec ICS and NetBackup 6.5 Server. Download the GSU files for both packages from Overland Storage and upload them to the SnapServer. Connect to the server over SSH and run the ICS and server installers.

How do I validate the NetBackup 6.5 installation on a SnapServer DX1 or DX2?

Verify that the NetBackup server processes are running by entering the command '/usr/openv/netbackup/bin/bpps -x'. Then add the server to the NetBackup master server as a media server and run a test backup job.