PCE PCE-ND10

Manuals and User Guides for PCE PCE-ND10. We found 3 manuals for free downloads User's manual, Owner's manual, Data Sheet

PCE PCE-ND10 is a digital programmable panel meter for measuring 3-phase, 4-wire power network parameters in balanced and unbalanced systems. It displays measured quantities and transmits them digitally. Additionally, it controls and optimizes power electronic devices, systems, and industrial installations. The programmable parameters include those for voltage, current, power, energy, power factor, frequency, and THD. PCE PCE-ND10 detects incorrect phase sequence and signals alarms when selected parameters exceed set limits. It can be powered by the voltage output, and it communicates via the RS-485 interface. The meter offers various display options and can be easily installed with mounting brackets. With its versatile features, PCE PCE-ND10 is a valuable tool for monitoring and controlling power systems in various industrial and commercial applications. Refer to the instruction manual for detailed information on installation, parameter settings, operation, and troubleshooting.

Key Features

  • Measures 3-phase, 4-wire power network parameters
  • Displays measured quantities and transmits them digitally
  • Capable of controlling and optimizing power electronic devices
  • Measures RMS values of voltage and current
  • Measures active, reactive, and apparent power
  • Measures active and reactive energy
  • Measures power parameters, frequency, and THD
  • Detects and signals incorrect phase sequence
  • Powered by the measuring circuit
  • Galvanic separation between inputs, outputs, and impulse output

Other manuals and documents

51 Pages

Owner's manual

Languages: English

3 Pages

Data Sheet

Languages: English

Frequently Answers and Questions

What are the measurement ranges for voltage and current?
The ND10 meter can measure voltages from 0.0 to 1.200 MV and currents from 0.0 to 440 kV.
What is the meter's accuracy?
The basic error of the ND10 meter is ±0.2% for voltage, current, active and reactive power, apparent power, 3-phase active power, frequency, and power factor.
What is the purpose of the RS-485 interface?
The RS-485 interface allows the measured values to be sent to a master device for further processing and analysis.
What are the alarm functions?
The ND10 meter can be configured to trigger alarms when selected parameters exceed set limits. Relay outputs signal the alarm. The alarm type can be set to normal-on, normal-off, always-on, always-off, or with a time delay.
What is the communication protocol used by the meter?
The ND10 meter uses the Modbus RTU protocol for communication over the RS-485 interface. The transmission speed can be set to 4.8, 9.6, 19.2, or 38.4 kbit/s.

advertisement