PS Engineering PMA6000

Manuals and User Guides for PS Engineering PMA6000. We found 5 manuals for free downloads Installation and Operation Manual, Installation manual, Manual

Below you will find brief information for Audio Selector Panel PMA6000B with Intercom System and Marker Beacon Receiver, Audio Selector Panel PMA6000B Option 2. The PMA6000B is a state of the art audio isolation amplifier and audio selector that contains a voice activated (VOX) intercom system. It can switch up two transceivers (Com 1, Com 2) and six receivers (Nav 1, Nav 2, ADF, DME, MKR and AUX). In addition, there are two unswitched inputs, for priority audio sources such as TAWS or altimeter warning. Push buttons select the receiver audio source provided to the headphones. A SPR button allows the user to listen to the receiver(s) selected on the cabin speaker. Except for the unswitched inputs, all speaker audio is muted during transmit. Push buttons select one of the transceivers for the pilot and copilot position in transmit. In "Split Mode" the PMA6000 has the ability to allow the pilot and copilot to operate different transmitters independently.

Key Features

  • Audio selector panel
  • Intercom system
  • Marker beacon receiver
  • Two transceivers (Com 1, Com 2)
  • Six receivers (Nav 1, Nav 2, ADF, DME, MKR and AUX)
  • Two unswitched inputs
  • Split Mode
  • Fail-safe mode
  • Four-station voice activated (VOX) intercom
  • Soft Mute

Pages: 26 PS Engineering PMA6000 Installation and Operation Manual

Brand: PS Engineering Category: Musical Equipment Size: 1 MB

Languages: English

Table of contents

Open manual

Other manuals and documents

31 Pages

Installation and Operation Manual

Languages: English

30 Pages

Installation and Operation Manual

Languages: English

32 Pages

Installation manual

Languages: English

6 Pages

Manual

Languages: English

Frequently Answers and Questions

What are the power requirements for the PMA6000B?
The PMA6000B-Series are compatible with both 13.8 and 28-Volt DC systems. A two (2) Amp circuit breaker is required. Power and ground wires must be a twisted #22 AWG pair.
What is the "Swap" Mode feature?
When a normally-open, momentary, push-button switch is connected between pin 29 on the connector and aircraft ground, the user can switch between Com 1 and 2 by depressing this switch without having to change the mic selector.
How does the backlighting system work?
The PMA6000B has an automatic backlighting system controlled by a photo detector. Additional control can be gained by the aircraft avionics dimmer control. Connect the dimmer control line to connector pin 41.

advertisement