Quantum Scalar i80
Manuals and User Guides for Quantum Scalar i80. We found 6 manuals for free downloads Data Sheet, User manual, User's Guide
Quantum Scalar i80 User`s guide
Brand: Quantum Size: 8 MB Pages: 404
Languages: English
Table of contents
- 3 Contents
- 15 Figures
- 19 Tables
- 21 Preface
- 26 SCSI-2 Specification
- 26 Quantum Corporate Headquarters
- 26 Technical Publications
- 26 Quantum Home Page
- 28 Worldwide End-User Product Warranty
- 29 Description
- 29 Overview
- 30 Library Components
- 30 Front Panel
- 31 Robotic System and Barcode Scanner
- 32 Magazines
- 33 Magazine Slot Location Coordinates
- 36 Power Supply
- 36 System Control Board
- 37 Tape Drives
- 37 Installed Tape Drive Location Coordinates
- 40 Standard Features
- 40 User Interface
- 40 Partitions
- 40 Control Path Modification
- 41 Support for WORM
- 41 Licensable Features
- 41 Capacity on Demand (COD)
- 42 Advanced Reporting
- 43 Encryption Key Management
- 45 Unpacking the Library
- 49 Understanding the User Interface
- 49 Operator Panel
- 50 Operator Panel Layout and Functions
- 55 Navigating and Editing on the Operator Panel
- 56 Web Client
- 56 Tips
- 57 Sorting Information in Tables
- 57 Web Client Layout and Functions
- 59 Web Client Home Page
- 59 System Summary
- 60 Subsystem Status
- 61 Menu Trees
- 65 Configuring the Library
- 67 Using the Setup Wizard
- 67 Operator Panel
- 67 Web Client
- 68 Default Configuration
- 68 Configuring Network Settings
- 69 Library Host Name
- 69 Web Client
- 70 DHCP
- 70 Operator Panel
- 70 Web Client
- 70 IP Addresses
- 71 Operator Panel
- 71 Web Client
- 71 Default Gateway, Subnet Mask, Network Prefix, and DNS Addresses
- 72 Operator Panel
- 72 Web Client
- 72 Configuring SNMP Settings
- 72 Registering External Management Applications
- 73 Web Client
- 74 Enabling SNMP Versions
- 74 Operator Panel
- 74 Web Client
- 74 Enabling SNMP Authentication Traps
- 75 Web Client
- 75 Modifying the SNMP Community String
- 75 Web Client
- 75 Downloading the SNMP MIB
- 76 Web Client
- 76 Setting the Date, Time, and Time Zone
- 77 Setting the Date and Time Manually
- 77 Operator Panel
- 77 Web Client
- 77 Setting the Date and Time Using the Network Time Protocol
- 78 Web Client
- 78 Setting the Time Zone
- 79 Web Client
- 79 Setting Daylight Saving Time
- 79 Web Client
- 79 Working With Partitions
- 81 Automatically Creating Partitions
- 82 Operator Panel
- 82 Web Client
- 82 Manually Creating Partitions
- 83 Web Client
- 84 Modifying Partitions
- 85 Web Client
- 85 Deleting Partitions
- 86 Operator Panel
- 86 Web Client
- 86 Viewing the Current Partitions
- 87 Operator Panel
- 87 Web Client
- 87 Changing Access to Partitions
- 87 Web Client
- 87 Taking a Partition Online or Offline
- 88 Operator Panel
- 89 Web Client
- 89 Configuring Cleaning Slots
- 90 Operator Panel
- 91 Web Client
- 91 Configuring I/E Station Slots
- 93 Operator Panel
- 93 Web Client
- 93 Configuring Tape Drive Parameters
- 95 Operator Panel
- 95 Web Client
- 95 Configuring Control Paths
- 96 Web Client
- 97 Adding or Upgrading Licensable Features
- 97 About License Keys
- 98 Viewing Your License Keys
- 98 Viewing Installed Licenses
- 98 Operator Panel
- 98 Web Client
- 98 Obtaining a License Key
- 99 Applying a License Key
- 99 Operator Panel
- 100 Web Client
- 100 Working With E-mail Notifications
- 101 Creating E-mail Notifications
- 102 Web Client
- 102 Modifying E-mail Notifications
- 103 Web Client
- 103 Deleting E-mail Notifications
- 104 Web Client
- 104 Configuring the Library E-Mail Account
- 104 Web Client
- 106 Setting Customer Contact Information
- 106 Web Client
- 107 Configuring the Service Port
- 107 Operator Panel
- 108 Working With Local User Accounts and Passwords
- 108 Using the Web Client Default Administrator Account
- 109 Privilege Levels
- 110 Creating Local User Accounts on the Web Client
- 110 Web Client
- 111 Modifying Local User Accounts on the Web Client
- 111 Web Client
- 112 Deleting Local User Accounts on the Web Client
- 112 Web Client
- 112 Enabling and Creating Passwords on the Operator Panel
- 113 Operator Panel
- 115 Disabling Passwords on the Operator Panel
- 115 Operator Panel
- 115 Modifying Passwords on the Operator Panel
- 115 Operator Panel
- 116 Resetting Passwords on the Operator Panel
- 116 Web Client
- 116 Working With LDAP User Accounts (Remote Authentication)
- 116 Local Authentication vs. Remote Authentication
- 117 LDAP Server Guidelines
- 118 Configuring Secure LDAP on the Library
- 118 Configuring LDAP on the Library
- 119 Web Client
- 122 Testing LDAP Settings
- 122 Configuring Kerberos
- 122 Web Client
- 124 Generating the Kerberos Service Keytab File
- 125 Setting the Session Timeout
- 126 Operator Panel
- 126 Configuring System Settings
- 126 Unload Assist
- 126 Operator Panel
- 127 Logical Serial Number Addressing
- 127 Operator Panel
- 128 Manual Cartridge Assignment
- 128 Understanding Host Application Notification
- 128 Operator Panel
- 129 SNMP
- 129 Operator Panel
- 129 SMI-S
- 129 Operator Panel
- 130 Power Save
- 130 Operator Panel
- 131 Configuring Security Settings
- 131 Network Interface
- 131 Operator Panel
- 132 SSH Services
- 132 Operator Panel
- 132 Internet Control Message Protocol (ICMP)
- 132 Operator Panel
- 133 Remote Access Via Web Client
- 133 Operator Panel
- 133 Remote Service Login
- 133 Operator Panel
- 133 SNMP V1/V2
- 134 SSL
- 134 Operator Panel
- 135 Saving and Restoring the Library Configuration
- 135 Saving the Library Configuration
- 135 Web Client
- 136 Restoring the Library Configuration
- 136 Web Client
- 137 Registering the Library
- 137 Web Client
- 137 Changing Operator Panel Home Screen View
- 137 Changing to Alternate Home Screen
- 138 Returning to Default Home Screen
- 139 Advanced Reporting
- 140 Advanced Reporting Features
- 141 Required Firmware
- 141 Working with Control Path Failover (CPF)
- 141 Prerequisites
- 142 Configuring CPF
- 142 Web Client
- 144 Forcing CPF
- 144 Web Client
- 146 Using Advanced Reporting Reports
- 147 Configuring the Drive Resource Utilization Report
- 149 Configuring the Media Integrity Analysis Report
- 149 Web Client
- 151 Using Advanced Reporting Templates
- 151 Web Client
- 152 Loading and Reloading Advanced Reporting Data
- 153 Deleting Advanced Reporting Data
- 153 Saving and E-mailing Advanced Reporting Data Files
- 153 Web Client
- 154 Working with the Media Security Log
- 155 Configuring Media Security
- 155 Web Client
- 156 Viewing, Saving, and E- mailing Media Security Log
- 156 Web Client
- 157 Viewing the Media Usage Log
- 158 Web Client
- 158 Automatically E-mailing Advanced Reporting Reports and Logs
- 159 Creating a Recipient
- 159 Web Client
- 162 Modifying a Recipient
- 162 Deleting a Recipient
- 163 Performing Library Operations
- 164 Logging In
- 164 Simultaneous Logins
- 164 Logging in for the First Time
- 165 Logging in Using the Operator Panel
- 165 Logging in Via the Web Client
- 166 Logging in When LDAP or Kerberos is Enabled
- 166 Logging Out
- 166 Operator Panel
- 167 Web Client
- 167 Shutting Down, Restarting, Turning Off, and Removing Power
- 168 Shutting Down the Library
- 168 Operator Panel
- 169 Web Client
- 170 Restarting the Library
- 170 Operator Panel
- 171 Web Client
- 171 Turning Off the Library
- 172 Completely Removing Library Power
- 172 Emergency Power-off Procedure
- 173 Taking the Library Offline
- 173 Unlocking and Opening the I/E Station
- 174 Operator Panel
- 176 Releasing Magazines
- 177 Releasing Magazines via the User Interface
- 177 Operator Panel
- 178 Web Client
- 178 Releasing Magazines Manually
- 179 Performing Media Operations
- 180 Importing Tape Cartridges
- 181 Inserting and Assigning Cartridges
- 182 Importing Cartridges via the Operator Panel
- 183 Importing Cartridges via Web Client
- 183 Bulk Loading Tape Cartridges
- 184 Moving Tape Cartridges
- 185 Web Client
- 186 Exporting Tape Cartridges
- 187 Operator Panel
- 187 Web Client
- 188 Loading Tape Drives
- 189 You can only load tape drives from the Web client.
- 189 Web Client
- 189 Unloading Tape Drives
- 190 Operator Panel
- 190 Web Client
- 191 Cleaning Tape Drives
- 192 Valid Cleaning Cartridges
- 192 About AutoClean
- 193 Enabling AutoClean
- 193 Importing Cleaning Cartridges
- 194 Inserting and Assigning Cartridges
- 194 Importing Cleaning Cartridges via the Operator Panel
- 195 Importing Cleaning Cartridges via the Web Client
- 195 Exporting Cleaning Cartridges
- 196 Operator Panel
- 196 Web Client
- 197 Manually Cleaning Tape Drives
- 198 Operator Panel
- 198 Web Client
- 200 Taking a Tape Drive Online or Offline
- 201 Operator Panel
- 201 Web Client
- 203 Encryption Key Management
- 204 About the EKM License
- 204 Configuring Scalar Key Manager (SKM) on the Library
- 204 Step 1: Upgrade Firmware
- 204 Step 2: Install the EKM License Key on the Library
- 205 Step 3: Install SKM on a Server or Servers
- 205 Step 4: Configure Encryption Settings and Key Server Addresses
- 207 Step 5: Install TLS Communication Certificates on the Library
- 207 Step 6: Run EKM Path Diagnostics
- 207 Step 7: Configure SKM Partitions and Generate Data Encryption Keys
- 210 Step 8: Save the Library Configuration
- 210 EKM Path Diagnostics
- 210 Description
- 211 Failure Scenarios
- 211 Running Manual EKM Path Diagnostics
- 212 Enabling Automatic EKM Path Diagnostics
- 213 Viewing Tape Drive Encryption Settings
- 213 Scalar Key Manager Functions Available on the Library
- 214 Installing TLS Certificates on the Library
- 214 Checking Whether TLS Certificates are Installed on Library
- 216 Installing Quantum-Supplied TLS Certificates
- 217 Installing Your Own TLS Certificates
- 219 Generating Data Encryption Keys
- 220 Generating Data Encryption Keys at Initial Setup
- 220 Generating Data Encryption Keys When 80% Depleted
- 220 Generating Data Encryption Keys When 100% Depleted
- 220 Manually Generating Data Encryption Keys
- 223 Sharing Encrypted Tape Cartridges
- 225 Exporting Encryption Certificates
- 226 Importing Encryption Certificates
- 227 Exporting Data Encryption Keys
- 229 Importing Data Encryption Keys
- 230 Accessing the SKM Server Logs
- 230 Using the SKM Encryption Key Import Warning Log
- 233 Getting Information About the Library
- 234 Viewing Library Information
- 234 Web Client
- 234 Viewing System Information
- 235 Operator Panel
- 235 Web Client
- 235 Viewing the Location of the Robot
- 238 Viewing the Library Configuration Report
- 238 Web Client
- 240 Saving and E-mailing the Library Configuration Record
- 241 Saving the Configuration Record
- 241 Web Client
- 241 E-mailing the Configuration Record
- 242 Web Client
- 242 Viewing the Network Settings Report
- 243 Web Client
- 243 Viewing the Logged in Users Report
- 243 Web Client
- 243 Viewing the All Slots Report
- 244 Web Client
- 245 Viewing, Saving, and E-mailing Library Logs
- 245 Cleaning Log
- 245 Web Client
- 246 Diagnostic Tickets Log
- 246 Web Client
- 247 Media Security Log (with Advanced Reporting License)
- 247 Media Usage Log (with Advanced Reporting License)
- 247 SKM Encryption Key Import Warning Log (with EKM License)
- 247 Web Client
- 248 Tape Drive Log
- 248 Web Client
- 249 Viewing Library Information on the Operator Panel
- 249 Viewing Partition Information
- 250 Operator Panel
- 250 Viewing Tape Drive Information
- 250 Operator Panel
- 250 Viewing Network Settings
- 250 Operator Panel
- 251 Viewing the Date, Time, and Time Zone
- 251 Operator Panel
- 251 Viewing Licenses
- 251 Operator Panel
- 251 Using Advanced Reporting Features
- 251 Viewing the Open Source License Agreement
- 251 Web Client
- 252 Viewing the Copyright Statement
- 252 Operator Panel
- 252 Web Client
- 253 Installing, Removing, and Replacing Components
- 254 Taking ESD Precautions
- 255 Connecting Library Cables
- 257 Installing the Rack Mount Kit (Rail Kit)
- 257 Supported Rack Types
- 258 Space Requirements
- 258 Tools Required
- 258 Rack Mount Kit Contents
- 260 Installing the Rack Mount Shelves
- 269 Installing the Library In a Rack
- 271 Removing the Library From a Rack
- 272 Installing the Library in a Desktop Kit
- 274 Kit Contents
- 274 Tools Required
- 275 Space Requirements
- 275 Procedure
- 280 Removing the Library from a Desktop Kit
- 281 Removing and Replacing the Front Bezel
- 281 Required Tools
- 281 Bezel Replacement Kit Contents
- 281 Bezel Replacement Procedure
- 286 Replacing the Chassis
- 286 Required Tools
- 287 Procedure
- 297 Removing and Installing a Filler Plate
- 297 Removing and Installing a Tape Drive Filler Plate
- 297 Removing a tape drive filler plate
- 297 Installing a tape drive filler plate
- 297 Removing and Installing a Power Supply Filler Plate
- 297 Removing a power supply filler plate
- 298 Installing a power supply filler plate:
- 299 Removing and Replacing a Magazine
- 299 Required Tools
- 299 Magazine Replacement Kit Contents
- 299 Creating a Backup Map of Cartridge Locations
- 300 Removing the Magazine from the Library
- 301 Installing the Magazine
- 304 Removing and Installing a Power Supply
- 305 Replacing a Power Supply in a Single- Power-Supply System (Scalar i40 and Scalar i80)
- 306 Adding or Replacing a Redundant Power Supply on the Scalar i80
- 307 Removing and Replacing the System Control Board
- 307 Replacing the System Control Board
- 309 Installing Library Firmware
- 311 Restoring the Library Configuration
- 312 Manually Reconfiguring the Library
- 314 Removing and Replacing a Tape Drive
- 315 Preparing Partitions and Control Paths
- 316 Removing a Tape Drive from the Library
- 316 Installing a Tape Drive
- 316 Tape Drive Slot Location Considerations
- 317 Installation Procedure
- 320 Packaging the Library for Moving or Shipping
- 320 Packaging Kit Contents
- 320 Creating a Backup Map of Cartridge Locations
- 321 Procedure
- 326 Replacing the Y-tray with Robot
- 327 Updating Firmware
- 327 Updating Library Firmware
- 329 Web Client
- 332 Updating and Autoleveling Tape Drive Firmware
- 332 About Tape Drive Firmware Autoleveling
- 334 Uploading Tape Drive Firmware Used in Autoleveling
- 334 Web Client
- 335 Deleting Tape Drive Firmware Used in Autoleveling
- 336 Web Client
- 337 Initiating Tape Drive Firmware Autoleveling
- 339 Troubleshooting
- 340 About Diagnostic Tickets
- 341 Viewing, Closing, and Resolving Diagnostic Tickets
- 342 Operator Panel
- 343 Web Client
- 344 Closing Diagnostic Tickets Automatically
- 344 Disabling or Enabling this Feature
- 344 Viewing Closed Diagnostic Tickets
- 345 Capturing Snapshots of Library Information
- 346 Web Client
- 346 Troubleshooting Library “Not Ready” Messages
- 346 “Not Ready” Messages on the Operator Panel
- 346 “Not Ready” Messages on the Web Client
- 348 Retrieving Tape Drive Logs
- 348 Web Client
- 348 Interpreting LEDs
- 349 Front Panel LEDs
- 350 System Control Board LEDs
- 351 Tape Drive/Sled LEDs
- 351 SAS
- 351 Fibre Channel
- 352 Power Supply LED
- 353 Running the Installation and Verification Test (IVT)
- 354 Prerequisites for Running IVT
- 355 Operator Panel
- 355 Running the IVT Diagnostic Subtests Individually – Robotics, Tape Drive, and Magazine Tests
- 356 Prerequisites for Running Diagnostic Subtests
- 357 Operator Panel
- 357 Running the Random Move Test
- 357 Operator Panel
- 358 Performing Library Diagnostics
- 358 Web Client
- 359 Resetting a Tape Drive
- 359 Operator Panel
- 360 Web Client
- 360 Robotics Get/Put Test
- 360 Web Client
- 361 Resetting Factory Defaults
- 361 Web Client
- 361 Operator Panel
- 363 Working With Cartridges and Barcodes
- 364 Handling Tape Cartridges Properly
- 365 Write-Protecting Tape Cartridges
- 365 Barcode Label Requirements
- 366 Supported Barcode Formats
- 367 Installing Barcode Labels
- 369 Specifications
- 369 Physical Specifications
- 370 Capacity
- 371 Environmental Specifications
- 371 Air Clearance Requirements
- 372 Library Power Specifications
- 373 Power Consumption and Heat Output
- 374 Communication Interfaces
- 374 Supported Tape Drives
- 375 Supported Media
- 375 Supported Internet Browsers
- 375 Microsoft® Windows®
- 375 Linux®
- 376 Solaris™
- 376 Supported Operating Systems
- 377 Tape Alert Flag Descriptions
- 387 Disposal of Electrical and Electronic Equipment
- 389 Glossary
- 399 Index
Quantum Scalar i80 User's Guide
Brand: Quantum Category: Tape auto loaders & libraries Size: 2 MB Pages: 18
Languages: English
Table of contents
- 2 Required Tools and Equipment
- 2 Environmental Requirements
- 2 Taking ESD Precautions
- 3 Unpacking the Library
- 5 Accessory Kit Contents
- 5 Desktop Kit
- 5 Installing the Tape Drives
- 7 Connecting the Cables
- 8 Network Settings
- 13 Client
- 14 Configuring Partitions
- 15 Importing Tape Cartridges
- 17 Saving the Library Configuration
- 17 Configuring the Host Software
- 17 Registering the Library
Quantum Scalar i40, Scalar i80 Replacement Manual
Brand: Quantum Size: 292 KB Pages: 8
Languages: English
Open in a new tab
Quantum Scalar i40 User's Guide
Brand: Quantum Category: Tape auto loaders & libraries Size: 3 MB Pages: 340
Languages: English
Open in a new tab
Quantum Scalar i40 User`s guide
Brand: Quantum Category: Tape auto loaders & libraries Size: 5 MB Pages: 328
Languages: English
Table of contents
- 3 Contents
- 13 Figures
- 17 Tables
- 19 Preface
- 23 SCSI-2 Specification
- 24 Quantum Corporate Headquarters
- 24 Technical Publications
- 24 Quantum Home Page
- 27 Description
- 27 Overview
- 28 Library Components
- 28 Front Panel
- 29 Robotic System and Barcode Scanner
- 30 Magazines
- 30 Magazine Slot Location Coordinates
- 33 Power Supply
- 33 System Control Board
- 34 Tape Drives
- 34 Installed Tape Drive Location Coordinates
- 36 Standard Features
- 36 User Interface
- 36 Partitions
- 36 Control Path Modification
- 37 Support for WORM
- 37 Licensable Features
- 37 Capacity on Demand (COD)
- 37 Advanced Reporting
- 39 Initial Installation and Setup
- 39 Required Tools and Equipment
- 40 Before You Begin
- 40 Unpacking the Library
- 44 Accessory Kit Items
- 44 Installing the Library in a Rack or Desktop Kit
- 44 Installing Tape Drives
- 45 Connecting the Cables
- 45 Turning the Library ON and Configuring Network Settings
- 51 Accessing the Library Via the Web Client
- 52 Configuring Partitions
- 52 Importing Tape Cartridges
- 52 Saving the Library Configuration
- 52 Configuring the Host Software
- 53 Understanding the User Interface
- 53 Operator Panel
- 54 Operator Panel Layout and Functions
- 56 Navigating and Editing on the Operator Panel
- 57 Web Client
- 57 Tips
- 58 Sorting Information In Tables
- 58 Web Client Layout and Functions
- 60 Web Client Home Page
- 60 System Summary
- 61 Subsystem Status
- 62 Menu Trees
- 65 Configuring the Library
- 67 Using the Setup Wizard
- 67 Operator Panel
- 67 Web Client
- 68 Default Configuration
- 68 Configuring Network Settings
- 69 Library Host Name
- 69 Web Client
- 69 DHCP
- 69 Operator Panel
- 69 Web Client
- 70 IP Addresses
- 70 Operator Panel
- 71 Web Client
- 71 Default Gateway, Subnet Mask, Network Prefix, and DNS Addresses
- 71 Operator Panel
- 71 Web Client
- 71 Configuring SNMP Settings
- 72 Registering External Management Applications
- 72 Web Client
- 73 Enabling SNMP Versions
- 73 Operator Panel
- 73 Web Client
- 73 Enabling SNMP Authentication Traps
- 74 Web Client
- 74 Modifying the SNMP Community String
- 74 Web Client
- 74 Downloading the SNMP MIB
- 75 Web Client
- 75 Setting the Date, Time, and Time Zone
- 76 Setting the Date and Time Manually
- 76 Operator Panel
- 76 Web Client
- 76 Setting the Date and Time Using the Network Time Protocol
- 77 Web Client
- 77 Setting the Time Zone
- 77 Web Client
- 77 Setting Daylight Saving Time
- 78 Web Client
- 78 Working With Partitions
- 79 Automatically Creating Partitions
- 80 Operator Panel
- 80 Web Client
- 81 Manually Creating Partitions
- 81 Web Client
- 83 Modifying Partitions
- 83 Web Client
- 83 Deleting Partitions
- 84 Operator Panel
- 84 Web Client
- 84 Viewing the Current Partitions
- 85 Operator Panel
- 85 Web Client
- 85 Changing Access to Partitions
- 85 Web Client
- 85 Taking a Partition Online or Offline
- 86 Operator Panel
- 86 Web Client
- 87 Configuring Cleaning Slots
- 88 Operator Panel
- 88 Web Client
- 89 Configuring I/E Station Slots
- 90 Operator Panel
- 90 Web Client
- 91 Configuring Tape Drive Parameters
- 92 Operator Panel
- 92 Web Client
- 93 Configuring Control Paths
- 93 Web Client
- 94 Adding or Upgrading Licensable Features
- 94 Viewing Your License Keys
- 94 Viewing Installed Licenses
- 94 Operator Panel
- 94 Web Client
- 95 About License Keys
- 95 Obtaining a License Key
- 96 Applying a License Key
- 96 Operator Panel
- 97 Web Client
- 97 Working With E-mail Notifications
- 98 Creating E-mail Notifications
- 98 Web Client
- 99 Modifying E-mail Notifications
- 99 Web Client
- 100 Deleting E-mail Notifications
- 100 Web Client
- 100 Configuring the Library E-Mail Account
- 101 Web Client
- 103 Setting Customer Contact Information
- 103 Web Client
- 103 Configuring the Service Port
- 104 Operator Panel
- 104 Working With Local User Accounts
- 105 Using the Web Client Default Administrative User Account
- 106 Privilege Levels
- 107 Creating Local User Accounts on the Web Client
- 107 Web Client
- 108 Modifying Local User Accounts on the Web Client
- 108 Web Client
- 108 Deleting Local User Accounts on the Web Client
- 108 Web Client
- 109 Enabling and Creating Passwords on the Operator Panel
- 110 Operator Panel
- 111 Disabling Passwords on the Operator Panel
- 111 Operator Panel
- 111 Modifying Passwords on the Operator Panel
- 111 Operator Panel
- 112 Resetting Passwords on the Operator Panel
- 112 Web Client
- 112 Working With LDAP User Accounts (Remote Authentication)
- 112 Local Authentication vs. Remote Authentication
- 113 Using Microsoft Active Directory
- 113 LDAP Server Guidelines
- 114 Enabling and Configuring LDAP on the Library
- 115 Web Client
- 116 Configuring Kerberos
- 116 Web Client
- 117 Generating the Kerberos Service Keytab File
- 119 Setting the Session Timeout
- 119 Operator Panel
- 119 Configuring System Settings
- 120 Unload Assist
- 120 Operator Panel
- 120 Logical Serial Number Addressing
- 120 Operator Panel
- 121 Manual Cartridge Assignment
- 121 Understanding Host Application Notification
- 122 Operator Panel
- 122 SNMP
- 122 Operator Panel
- 122 SMI-S
- 122 Operator Panel
- 123 Configuring Security Settings
- 123 Network Interface
- 123 Operator Panel
- 123 SSH Services
- 123 Operator Panel
- 124 Internet Control Message Protocol (ICMP)
- 124 Operator Panel
- 124 Remote Access Via Web Client
- 124 Operator Panel
- 125 Remote Service Login
- 125 Operator Panel
- 125 SSL
- 126 Operator Panel
- 126 Saving and Restoring the Library Configuration
- 127 Saving the Library Configuration
- 127 Web Client
- 127 Restoring the Library Configuration
- 128 Web Client
- 128 Registering the Library
- 128 Web Client
- 129 Performing Library Operations
- 130 Logging In
- 130 Simultaneous Logins
- 130 Logging In for the First Time
- 130 Logging In Using the Operator Panel
- 131 Logging In Via the Web Client
- 131 Logging In When LDAP or Kerberos is Enabled
- 132 Logging Out
- 132 Operator Panel
- 132 Web Client
- 133 Shutting Down, Restarting, Turning Off, and Removing Power
- 133 Shutting Down the Library
- 134 Operator Panel
- 135 Web Client
- 135 Restarting the Library
- 135 Operator Panel
- 136 Web Client
- 137 Turning Off the Library
- 137 Completely Removing Library Power
- 138 Emergency Power-off Procedure
- 139 Taking the Library Offline
- 139 Unlocking the I/E Station
- 140 Operator Panel
- 140 Releasing Magazines
- 141 Releasing Magazines via the User Interface
- 141 Operator Panel
- 142 Web Client
- 142 Releasing Magazines Manually
- 143 Performing Media Operations
- 143 Importing Tape Cartridges
- 145 Inserting and Assigning Cartridges
- 145 Importing Cartridges via the Operator Panel
- 146 Importing Cartridges via Web Client
- 147 Bulk Loading Tape Cartridges
- 147 Moving Tape Cartridge
- 148 Web Client
- 149 Exporting Tape Cartridges
- 150 Operator Panel
- 150 Web Client
- 151 Loading Tape Drives
- 152 You can only load tape drives from the Web client.
- 152 Web Client
- 153 Unloading Tape Drives
- 153 Operator Panel
- 153 Web Client
- 154 Cleaning Tape Drives
- 156 Valid Cleaning Cartridges
- 156 About AutoClean
- 156 Enabling AutoClean
- 157 Importing Cleaning Cartridges
- 157 Inserting and Assigning Cartridges
- 158 Importing Cleaning Cartridges via the Operator Panel
- 158 Importing Cleaning Cartridges via the Web Client
- 159 Exporting Cleaning Cartridges
- 159 Operator Panel
- 160 Web Client
- 160 Manually Cleaning Tape Drives
- 161 Operator Panel
- 161 Web Client
- 163 Taking a Tape Drive Online or Offline
- 164 Operator Panel
- 164 Web Client
- 165 Getting Information About the Library
- 166 Viewing Library Information
- 166 Web Client
- 166 Viewing System Information
- 167 Operator Panel
- 167 Web Client
- 167 Viewing the Library Configuration Report
- 167 Web Client
- 169 Saving and E-mailing the Library Configuration Record
- 170 Saving the Configuration Record
- 170 Web Client
- 171 E-mailing the Configuration Record
- 171 Web Client
- 171 Viewing the Network Settings Report
- 172 Web Client
- 172 Viewing the Logged in Users Report
- 172 Web Client
- 173 Viewing the All Slots Report
- 173 Web Client
- 174 Viewing, Saving, and E-mailing Logs
- 174 Cleaning Log
- 174 Web Client
- 175 Diagnostic Tickets Log
- 175 Web Client
- 175 Tape Drive Log
- 176 Web Client
- 177 Viewing Library Information on the Operator Panel
- 177 Viewing Partition Information
- 177 Operator Panel
- 177 Viewing Network Settings
- 177 Operator Panel
- 178 Viewing the Date, Time, and Time Zone
- 178 Operator Panel
- 178 Viewing Licenses
- 178 Operator Panel
- 178 Using Advanced Reporting
- 179 Required Firmware
- 179 Using the Reports and Understanding the Data
- 180 Loading and Reloading Advanced Reporting Data
- 180 Configuring the Drive Resource Utilization Report
- 182 Configuring the Media Integrity Analysis Report
- 183 Saving and E-mailing Advanced Reporting Data
- 184 Creating and Using a Template
- 184 Deleting Advanced Reporting Data
- 185 Viewing the Open Source License Agreement
- 185 Web Client
- 186 Viewing the Copyright Statement
- 186 Operator Panel
- 186 Web Client
- 187 Updating Firmware
- 187 Upgrading Library Firmware
- 189 Web Client
- 190 Updating and Autoleveling Tape Drive Firmware
- 190 About Tape Drive Firmware Autoleveling
- 192 Uploading Tape Drive Firmware Used in Autoleveling
- 192 Web Client
- 194 Deleting Tape Drive Firmware Used in Autoleveling
- 194 Web Client
- 195 Initiating Tape Drive Firmware Autoleveling
- 197 Installing, Removing, and Replacing Components
- 198 Taking ESD Precautions
- 199 Connecting Library Cables
- 200 Installing the Rack Mount Kit (Rail Kit)
- 201 Supported Rack Types
- 201 Space Requirements
- 202 Tools Required
- 202 Rack Mount Kit Contents
- 203 Installing the Rack Mount Shelves
- 212 Installing the Library In a Rack
- 214 Removing the Library From a Rack
- 215 Installing the Library in a Desktop Kit
- 217 Kit Contents
- 217 Tools Required
- 218 Space Requirements
- 218 Procedure
- 223 Removing the Library from a Desktop Kit
- 224 Removing and Replacing the Front Bezel
- 224 Required Tools
- 224 Bezel Replacement Kit Contents
- 224 Bezel Replacement Procedure
- 228 Removing and Replacing the Chassis
- 229 Required Tools
- 229 Procedure
- 239 Removing and Installing a Filler Plate
- 239 Removing and Installing a Tape Drive Filler Plate
- 239 Removing a tape drive filler plate
- 239 Installing a tape drive filler plate
- 240 Removing and Installing a Power Supply Filler Plate
- 240 Removing a power supply filler plate
- 240 Installing a power supply filler plate:
- 241 Removing and Replacing a Magazine
- 241 Required Tools
- 241 Magazine Replacement Kit Contents
- 242 Creating a Backup Map of Cartridge Locations
- 242 Removing the Magazine from the Library
- 243 Installing the Magazine
- 246 Removing and Installing a Power Supply
- 247 Replacing a Power Supply in a Single- Power-Supply System (Scalar i40 and Scalar i80)
- 248 Adding or Replacing a Redundant Power Supply on the Scalar i80
- 249 Removing and Replacing the System Control Board
- 250 Replacing the System Control Board
- 252 Installing Library Firmware
- 254 Restoring the Library Configuration
- 255 Manually Reconfiguring the Library
- 257 Removing and Replacing a Tape Drive
- 257 Preparing Partitions and Control Paths
- 258 Removing a Tape Drive from the Library
- 259 Installing a Tape Drive
- 259 Tape Drive Slot Location Considerations
- 260 Installation Procedure
- 263 Packaging the Library for Moving or Shipping
- 263 Packaging Kit Contents
- 263 Creating a Backup Map of Cartridge Locations
- 263 Procedure
- 268 Replacing the Robot
- 269 Troubleshooting
- 270 About Diagnostic Tickets
- 271 Viewing, Closing, and Resolving Diagnostic Tickets
- 271 Operator Panel
- 271 Web Client
- 273 Capturing the Library Snapshot
- 273 Web Client
- 274 Troubleshooting Library “Not Ready” Messages
- 274 “Not Ready” Messages on the Operator Panel
- 274 “Not Ready” Messages on the Web Client
- 276 Retrieving Tape Drive Logs
- 276 Web Client
- 276 Interpreting LEDs
- 277 Front Panel LEDs
- 278 System Control Board LEDs
- 279 Tape Drive/Sled LEDs
- 279 SAS
- 279 Fibre Channel
- 281 Power Supply LED
- 281 Running the Installation and Verification Test (IVT)
- 283 Operator Panel
- 283 Running the IVT Diagnostic Subtests Individually – Robotics, Tape Drive, and Magazine Tests
- 284 Operator Panel
- 284 Running the Random Move Test
- 284 Operator Panel
- 285 Performing Library Diagnostics
- 285 Web Client
- 286 Resetting a Tape Drive
- 286 Operator Panel
- 286 Web Client
- 287 Robotics Get/Put Test
- 287 Web Client
- 287 Resetting Factory Defaults
- 288 Web Client
- 288 Operator Panel
- 289 Working With Cartridges and Barcodes
- 290 Handling Cartridges Properly
- 291 Write-Protecting Tape Cartridges
- 291 Barcode Requirements
- 293 Installing Barcode Labels
- 295 Specifications
- 295 Physical Specifications
- 296 Capacity
- 297 Environmental Specifications
- 297 Air Clearance Requirements
- 298 Power Specifications
- 298 Communication Interfaces
- 299 Supported Tape Drives
- 299 Supported Media
- 300 Supported Internet Browsers
- 300 Microsoft® Windows®
- 300 Linux®
- 300 Solaris™
- 301 Tape Alert Flag Descriptions
- 311 Disposal of Electrical and Electronic Equipment
- 313 Glossary
- 323 Index
Quantum Scalar i40 Tape Auto Loaders & Library Data Sheet
Brand: Quantum Category: Tape auto loaders & libraries Size: 191 KB Pages: 2
Languages: English
Open in a new tab