Queclink GL300
Manuals and User Guides for Queclink GL300. We found 10 manuals for free downloads User manual, Specification, Quick Start, Application Notes, Manual
Below you will find brief information for GPS Tracker GL300. The GL300 is a powerful GPS Tracker designed for asset, vehicle, and pet tracking. With superior receive sensitivity, fast TTFF (Time to First Fix) and Quad band GSM frequencies 850/900/1800/1900, its location can be continuously monitored or periodically reported to a backend server or other device. Based on the embedded @Track protocol, the GL300 can communicate with the backend server through the GPRS/GSM network (or SMS) to report emergency alerts, Geo-Fence boundary crossings, low battery and scheduled GPS positions along with several other advanced reporting features.
Key Features
GPS tracking
Asset tracking
Vehicle tracking
Pet tracking
Fast TTFF
Quad band GSM frequencies
Emergency alerts
Geo-Fence boundary crossings
Low battery alerts
Pages: 14 Queclink GL300 User manual
Brand: Queclink Category: Security device components Size: 573 KB
Languages: English
Open manualOther manuals and documents
Frequently Answers and Questions
What is the difference between GSM and GPRS?
GSM is a standard for cellular communication, while GPRS is a standard for data communication over a GSM network.
How do I charge the battery?
Connect the AC-DC power adapter to the GL300 and plug it into a power socket. The PWR LED will flash quickly during charging and will be solid when the battery is full charged.
How do I install the SIM card?
Open the cover of the SIM card slot, insert the SIM card into the slot according to the direction shown, and cover the slot.
Questions & Answers
I I F
How is the GL300 Manage Tool used?
The GL300 Manage Tool is PC software used to configure the GL300 via Data_Cable_M. Before use, install the driver for PL2303. Then, power on the GL300, connect it to the PC with Data_Cable_M, and run the “Queclink GL300_Manage_Tool_Vx.xx.exe”.
W W F
What software program is required to configure the GL300 parameters?
The program required is “Queclink GL300_Manage_Tool_ Vx.xx.exe”, which is included in the developer kit.
G G P
Is it possible to replace the internal battery of the GL300 device?
Disassembling the GL300 device is explicitly advised against, including for internal battery replacement, as no instructions are provided for this. However, an external battery can be connected via the Mini-USB interface as an alternative power source.
What are the steps to troubleshoot when the GL300's battery is not holding a charge?
To troubleshoot a battery not holding a charge on the GL300, first, ensure the correct charging procedures are followed: connect the AC-DC power adapter to the GL300 and a power socket. The PWR LED should flash quickly during charging and turn solid (Ever-light) when fully charged, which usually takes about 5 hours. If the battery still does not hold a charge or the PWR LED does not behave as described after these steps, there is no further specific troubleshooting guidance provided. Disassembling the device is not recommended.
R R M
How to turn on the GL300 device?
The GL300 can be turned on by pressing the Power key for at least 3 seconds and releasing it, which will cause the PWR LED to light up. Alternatively, connecting the device to a charger or external battery will automatically turn it on and light the PWR LED.
R R M
How to turn on the GL300?
The GL300 can be turned on by either pressing the Power key for at least 3 seconds until the PWR LED lights up, or by connecting the device to a charger or external battery, which will automatically turn it on and light up the PWR LED.
advertisement