Radionics D9680T Long Range PIR

Manuals and User Guides for Radionics D9680T Long Range PIR. We found 1 manuals for free downloads Installation instructions

Below you will find brief information for motion detector D9680T Long Range PIR. This document provides instructions on installing and configuring the D9680T Long Range PIR, a motion detector designed for security applications. It details how to mount the detector, connect wiring, configure sensitivity modes, and perform walk tests to ensure proper operation. The document includes diagrams illustrating the coverage patterns, wiring connections, and the B334 mounting bracket.

Key Features

  • Long Range Detection
  • POPIT Interface
  • Sensitivity Adjustments
  • Supervision Features
  • Walk Test Functionality
  • B334 Mounting Bracket
  • Coverage Pattern Diagrams
  • Masking Options
  • Final Tests
  • Technical Specifications

Pages: 4 Radionics D9680T Long Range PIR Installation instructions

Brand: Radionics Category: Motion detectors Size: 44 KB

Languages: English

Open manual

Frequently Answers and Questions

How do I connect the D9680T to the Zonex Bus?
Connect the detector to the Zonex Bus of the control panel using the terminal strip located on the circuit board. Use no smaller than #22 AWG (0.8 mm) wire between the detector and the control panel.
What are the different sensitivity modes and how do I adjust them?
The D9680T has three sensitivity modes: Standard, Intermediate, and High. These can be adjusted using configuration switches S2 and S3 on the circuit board. Standard is best for tolerating environmental extremes, Intermediate is recommended for most locations, and High is for very quiet environments.
How do I perform a walk test?
First apply power to the unit and wait two minutes. Then walk across the coverage pattern while observing the Alarm/Test LED indicator. The edge of the coverage pattern is determined when the LED first turns on. It is recommended to walk test the unit from all directions to determine the boundaries.

advertisement