2109 Handbücher

Renesas USB Mass Storage Class Host

Handbücher und Benutzerhandbücher für Renesas USB Mass Storage Class Host. Wir haben 1 handbücher zum kostenlosen Download Manual

Below you will find brief information for USB Mass Storage Class Host. This application note illustrates how to access data on a USB stick, connect to the board and import the project into e² studio. It also describes the key features of the USB Mass Storage Class (host) demo application and the steps needed to run the application.

Hauptfunktionen

USB stick access
Board connection
Project import
Application demonstration
FileX storage
File read/write
LED indication

Renesas Synergy Project USBX Mass Storage Class Host Application Note

Seiten: 6 Renesas USB Mass Storage Class Host Manual

Marke: Renesas Kategorie: Switch & router software Größe: 74 KB

Sprachen: English

Handbuch öffnen

Häufige Antworten und Fragen

How do I connect the board to power, the J-Link debugger to the PC, and the board to the USB stick?

Refer to the Quick Start Guide for PE-HMI1, DK-S7G2, DK-S3A7, or SK-S7G2 for setting up the power connection and the J-Link debugger connection from your PC to the JTAG connector on the target board. Then, connect a USB stick formatted FAT32 to the board’s USB host connector.

How do I import the project into e² studio?

Refer to the "Synergy Project Import Guide" (r11an0023eu0100_synergy_ssp.pdf) for instructions on importing the project into e² studio and building/running the project. When debugging, use the “USBX_Mass_Storage_Host Debug” configuration.

What are the key features of the USB Mass Storage Class (host) demo application?

The demonstration application illustrates USB connectivity through these two functions: the board mounts the USB stick as a FileX storage media, and the application opens a file on the stick, increments the first character in the file, and writes it back to the storage media.