Renesas USB Mass Storage Class Host

Manuals and User Guides for Renesas USB Mass Storage Class Host. We found 1 manuals for free downloads Manual

Below you will find brief information for USB Mass Storage Class Host. This application note illustrates how to access data on a USB stick, connect to the board and import the project into e² studio. It also describes the key features of the USB Mass Storage Class (host) demo application and the steps needed to run the application.

Key Features

  • USB stick access
  • Board connection
  • Project import
  • Application demonstration
  • FileX storage
  • File read/write
  • LED indication

Pages: 6 Renesas USB Mass Storage Class Host Manual

Brand: Renesas Category: Switch & router software Size: 74 KB

Languages: English

Open manual

Frequently Answers and Questions

How do I connect the board to power, the J-Link debugger to the PC, and the board to the USB stick?
Refer to the Quick Start Guide for PE-HMI1, DK-S7G2, DK-S3A7, or SK-S7G2 for setting up the power connection and the J-Link debugger connection from your PC to the JTAG connector on the target board. Then, connect a USB stick formatted FAT32 to the board’s USB host connector.
How do I import the project into e² studio?
Refer to the "Synergy Project Import Guide" (r11an0023eu0100_synergy_ssp.pdf) for instructions on importing the project into e² studio and building/running the project. When debugging, use the “USBX_Mass_Storage_Host Debug” configuration.
What are the key features of the USB Mass Storage Class (host) demo application?
The demonstration application illustrates USB connectivity through these two functions: the board mounts the USB stick as a FileX storage media, and the application opens a file on the stick, increments the first character in the file, and writes it back to the storage media.

advertisement