Risco ProSYS

Manuals and User Guides for Risco ProSYS. We found 1 manuals for free downloads: User manual

Risco ProSYS Quick Programming

Brand: Risco Category: Security access control systems Size: 991 KB Pages: 28

Languages: English

Table of contents

• 3 Introduction
• 3 I. Suitable Locations
• 3 II. Installing Hardware (Devices)
• 3 1. BUS Connection
• 4 1.1 Setting BUS Accessory ID Numbers
• 5 2. Setting Zone Inputs Connection
• 5 EZ16G3) or Inputs on iWISE BUS
• 6 3. Wiring Auxiliary Devices (Sensors)
• 6 4. Wiring Internal Bell
• 6 5. Bell Tamper Wiring (Terminal Bell TMP)
• 7 6. Wiring UO1 to Activate Any External Stand-alone Siren
• 7 7. Wiring Important BUS Accessories
• 7 7.1 Wiring the Voice Module
• 8 7.2 ProSound - BUS Siren Connection
• 8 7.3 Wiring the GSM
• 9 7.4 Wiring BUS Detectors
• 10 III. Programming the System
• 10 Power Up and Enter Installer Mode
• 11 Identifying the Connected Devices (including BUS Detectors)
• 11 Automatic Settings
• 11 Bus Test
• 11 Programming: SYSTEM
• 11 SYSTEM - Timers
• 11 SYSTEM - Controls
• 12 SYSTEM - Set Clock
• 12 Programming: Wireless ZONES
• 12 ZONES - Wireless Calibration
• 12 ZONES - Wireless Zone Allocation
• 13 ZONES - Wireless Communication Test
• 13 Programming: ZONES Wired & Wireless (Attributes)
• 13 PARTITIONS
• 13 GROUP SETS
• 13 ZONE TYPE
• 13 ZONE SOUND
• 14 ZONE TERMINATION
• 14 ZONE RESPONSE
• 14 ZONE LABELS
• 14 Programming BUS Detectors
• 14 Programming BUS detectors on the Main BUS
• 15 Programming BUS Detectors on a BUS Zone Expander
• 16 Programming the Input on the iWISE BUS Detector
• 17 Programming: Dialer (For PSTN Dialing)
• 17 DIALER - Link-Up
• 17 DIALER - Accounts
• 17 DIALER - Communication Format
• 18 DIALER - Control
• 18 DIALER - Auto Codes
• 18 DIALER - Follow Me
• 18 Programming: PROG OUTPUTS
• 18 PROG OUTPUTS - Define
• 19 Codes
• 19 System Backup
• 19 Exiting Programming Mode
• 20 Installer Programming Menu Maps
• 26 Technical Specifications

Open in a new tab