Rollei RCP-7324
Manuals and User Guides for Rollei RCP-7324. We found 4 manuals for free downloads User manual, Owner's manual
Below you will find brief information for digital camera. This user manual provides essential information on setting up and using your new digital camera. It covers basic operations like turning the camera on/off, choosing screen language, setting date/time, formatting memory cards, and using the photography modes, including settings such as image resolution and quality, zoom function, flash, and focus. You'll also find information on capture modes, playback mode, movie mode, and advanced features.
Key Features
Complies with FCC Rules
Image resolution control
Zoom Function
Flash Modes
Focus Modes
Capture Modes
Playback Modes
Movie Mode
Pages: 51 Rollei RCP-7324 User manual
Brand: Rollei Category: Data projectors Size: 4 MB
Languages: English
Table of contents
- 1 (1) This device may not cause harmful interference, and
- 1 (2) This device must accept any interference received, including interference that may cause undesired operation.
- 2 Trademark Information
- 2 Product Information
- 3 Warnings
- 4 Cautions
- 5 Notes on Battery Usage
- 7 INTRODUCTION
- 7 Package Contents
- 8 GETTING TO KNOW YOUR CAMERA
- 8 Front View
- 9 Rear View
- 10 Mode Dial
- 10 2.
- 10 3.
- 10 4.
- 10 5.
- 10 6.
- 10 7.
- 10 8.
- 10 2. Compose your subject within the focus frame. When you press the shutter release button down half way, the camera’s Auto Focus feature automatically focuses the image. Proper exposure is determined and locked at the same time.
- 10 3. Press the shutter release button all the way down to capture the image.
- 11 LCD Monitor Information
- 11 2. Flash mode
- 11 3. Capture mode
- 11 4. Focus mode
- 11 5. Possible number of shots
- 11 6. Memory status
- 11 7. Battery and AC adapter
- 11 8. Recorded pixels
- 11 9. Image quality
- 11 10. White balance
- 11 11. ISO sensitivity
- 11 12. EV compensation
- 11 13. Focus area
- 11 14. Zoom bar
- 12 2. Flash mode
- 12 3. Recordable movie time available
- 12 4. Memory status
- 12 5. Battery power and AC adapter indicator
- 12 6. Focus area
- 12 7. Zoom bar
- 12 2. Number of image
- 12 3. Memory status
- 12 4. Battery power and AC adapter indicator
- 12 5. Index number of total number
- 12 6. DPOF indicator
- 12 7. Protect indicator
- 12 8. Date
- 12 9. Time
- 12 10. Aperture
- 12 11. Shutter speed
- 12 12. EV compensation
- 12 13. ISO sensitivity
- 12 14. White balance
- 12 15. Image quality
- 12 16. Recorded pixels
- 12 2. Movie mode
- 12 3. Number of movie
- 12 4. Memory status
- 12 5. Battery power and AC adapter indicator
- 12 6. Index number of total number
- 12 7. Elapsed time
- 12 8. Date
- 12 9. Time
- 12 10. Play/Pause indicator
- 13 PREPARING THE CAMERA
- 13 2. Open the battery/SD memory card cover.
- 13 3. Insert the batteries with correct orientation as shown.
- 13 4. Insert an SD memory card (Optional).
- 13 5. Close the battery/SD memory card cover and make sure it is locked securely.
- 14 LED Indicators and Self-timer Indicators
- 14 Using the AC Adapter (Optional Accessory)
- 14 2. Connect one end of the AC adapter to the camera DC input terminal labeled "DC IN 3.3V".
- 14 3. Connect the other end to a power outlet.
- 15 GETTING STARTED
- 15 Turning the Power On/Off
- 15 Choosing the Screen Language
- 15 2. [Set-up1] is displayed.
- 15 3. Use the four-way controller (q) to select [Language], then press the button.
- 15 4. Use the four-way controller (pq) to select the language you want.
- 15 5. Press the button to confirm.
- 16 Setting the Date and Time
- 16 2. [Set-up1] is displayed.
- 16 3. Use the four-way controller (q) to select [Date & Time], then press the button.
- 16 4. Press the four-way controller (tu) to select Day, Month, Year and Time fields.
- 16 5. Press the button after all fields are set.
- 16 Formatting an SD Memory Card or Internal Memory
- 16 2. Use the four-way controller (q) to select [Format], then press the button.
- 16 3. Use the four-way controller (pq) to select [Yes], then press the button to confirm.
- 17 PHOTOGRAPHY MODE
- 17 Shooting Images
- 17 2. Compose the image on the LCD monitor screen so that the main subject is within the focus frame.
- 17 3. Press the shutter release button down halfway to focus the image.
- 17 4. Press the shutter release button the rest of the way down to capture the image.
- 18 Setting Image Resolution and Quality
- 18 2. Press the MENU button.
- 18 3. Use the four-way controller (q) to select [Image Size], then press the button.
- 18 4. Use the four-way controller (pq) to select the desired setting, then press the button to confirm.
- 18 5. Follow the step 3 and 4 above to set the [Quality].
- 19 Using the Zoom Function
- 19 2. Adjust the magnification ratio by using the / button.
- 19 3. Compose your scene and press the shutter release button.
- 20 Using the Flash
- 20 2. Press the power switch to turn on the power.
- 20 3. Press the four-way controller (t/). The flash mode changes each time the button is pressed. You can also change the setting using the four-way controller (pq).
- 20 4. Press the button to confirm the setting.
- 20 5. Compose your scene and press the shutter release button.
- 21 Setting Focus
- 21 2. Press the power switch to turn on the power.
- 21 3. Press the four-way controller (u/). The focus mode changes each time the button is pressed. You can also change the setting using four-way controller (pq).
- 21 4. Press the button to confirm the setting.
- 21 5. Compose your scene and press the shutter release button.
- 22 CAPTURE MODE
- 22 Burst
- 22 2. Press the power switch to turn on the power.
- 22 3. Press the four-way controller (p/) and use (p) to select [Burst]. You can also change the setting using four-way controller (tu).
- 22 4. Press the button to confirm the setting. The indicator is displayed on the monitor screen.
- 22 5. Press the shutter release button halfway to lock the focus.
- 22 6. Press the shutter release button to capture a sequence of images.
- 22 Auto Bracket
- 22 2. Press the power switch to turn on the power.
- 22 3. Press the four-way controller (p/) and use (p) to select [AEB]. You can also change the setting using the four-way controller (tu).
- 22 4. Press the button to confirm the setting. The indicator is displayed on the LCD monitor screen.
- 22 5. Press the shutter release button to capture the three images.
- 23 Self-Timer
- 23 2. Rotate the mode dial to , , , , , or .
- 23 3. Press the power switch to turn on the power.
- 23 4. Press the four-way controller (p/) and use (p) to select your desired self-timer mode. You can also change the setting using four-way controller (tu).
- 23 5. Press the button to confirm the setting.
- 23 6. Compose your scene and press the shutter release button.
- 24 Adjusting the Exposure (EV Compensation)
- 24 2. Press the power switch to turn on the power.
- 24 3. Press the four-way controller (q/) and use (tu) to set the range of EV compensation value from -2.0EV to +2.0EV.
- 24 4. Press the button to confirm the setting.
- 24 Setting White Balance
- 24 2. Press the power switch to turn on the power.
- 24 3. Press the MENU button. [Mode1] is displayed.
- 24 4. Use the four-way controller (q) to select [W. Balance], then press the button.
- 24 5. Use the four-way controller (pq) to select the desired white balance setting, then press the button to confirm.
- 24 6. To cancel the setting, press the MENU button and exit the menu.
- 25 PLAYBACK MODE - THE BASICS
- 25 Viewing Images
- 25 2. Press the button.
- 25 3. Use the four-way controller (tu) to select the desired images.
- 26 Magnifying Images
- 26 2. Adjust the zoom ratio by using the / button.
- 26 3. To view different portions of the images, press the four-way controller (pqtu) to adjust the display area.
- 26 Thumbnail Display
- 26 2. Press the button once.
- 26 3. Use the four-way controller (pqtu) to move the cursor to select the image to be displayed at regular size.
- 26 4. Press the or / button to display the selected image on full screen.
- 27 Slideshow Display
- 27 2. Press the MENU button to access the Playback menu. Then use the four-way controller (q) to select [Slide Show] and press the button.
- 27 3. Use the four-way controller (pq) to set the playback interval, then press the button.
- 27 Resizing an Image
- 27 2. In the mode, use the four-way controller (tu) to select the desired images.
- 27 3. Press the MENU button to access the Playback menu. Press the four-way controller (u) to select [Playback2] and press (q) to select [Resize] and press the button.
- 27 4. Use the four-way controller (pq) to select the desired setting, then press the button to confirm.
- 28 MOVIE MODE
- 28 Recording Movie Clips
- 28 2. Press the shutter release button to start recording.
- 28 3. To stop recording, press the shutter release button again.
- 28 Playing Back Movie Clips
- 28 2. Use the four-way controller (tu) to go through the images until the movie clip you want to play back is displayed.
- 28 3. Press the button to start playing back the movie clips.
- 29 PLAYBACK MODE - ADVANCED FEATURES
- 29 Playing Back Still Images/Movie Clips on TV
- 29 2. Connect the other end to the AV input socket of the TV set.
- 29 3. Turn the TV and digital camera on.
- 29 4. Playback the images/movie clips.
- 29 5. Set the TV to receive its signal from the line-in jack rather than the antenna or cable.
- 30 Deleting Images/Movie Clips
- 30 2. Press the button.
- 30 3. Use the four-way controller (tu) to select the image/movie clip you want to delete.
- 30 4. Press the button to delete.
- 30 5. Use the four-way controller (pq) to select [This Image] or [All Images], then press the button.
- 30 6. When the delete message appears, use the four-way controller (pq) to select [Yes], then press the button to confirm the deletion.
- 31 Protecting Images/Movie Clips
- 31 2. In the mode, use the four-way controller (tu) to select the desired images.
- 31 3. Press the MENU button, then use the four-way controller(q) to select [Protect] and press the button.
- 31 4. Use the four-way controller (pq) to choose the desired setting, then press the button.
- 31 5. Use the four-way controller (pq) to select [Lock], then press the button to confirm.
- 32 Setting the DPOF
- 32 2. Press the MENU button. Use the four-way controller (pq) to select [DPOF], then press the button.
- 32 3. Use the four-way controller (pq) to select by your preference, then press the button.
- 33 4. Use the four-way controller (pq) to select by your preference, then press the button.
- 33 5. Press the MENU button to return to the image playback mode.
- 34 TRANSFERRING RECORDED IMAGES AND VIDEOS TO YOUR COMPUTER
- 34 2. Press the four-way controller (u) to select the [Set-up2] menu, then use the four-way controller (q) to select [USB Mode].
- 34 3. Press the button.
- 34 4. Use the four-way controller (q) to select [PC], then press the button.
- 34 5. Turn off your camera.
- 34 6. Connect your camera and the computer via the supplied USB cable.
- 34 7. Turn your camera on by pressing the power switch.
- 34 8. From the Windows desktop, double click on “My Computer”.
- 34 9. Look for a new “removable disk” icon.
- 34 10. Double click on the removable disk and locate the DCIM folder.
- 34 11. Double click on the DCIM folder to open it to find more folders.
- 34 12. Copy & Paste or Drag-N-Drop image and video files to a folder on your computer.
- 35 EDITING SOFTWARE INSTALLATION
- 35 2. Click the respective software name. Follow the on-screen instructions to complete the installation.
- 36 USING THE DIGITAL CAMERA AS A PC CAMERA
- 36 Step 1: Install the PC camera driver
- 36 2. When the welcome screen appears, click “INSTALL PC-CAM DRIVER”. Follow the on-screen instructions to complete the installation.
- 36 3. After the driver installation is completed, restart your computer.
- 37 Step 2: Connect the digital camera to your computer
- 37 2. Press the four-way controller (u) to select the [Set-up2] menu, then use the four-way controller (q) to select [USB Mode].
- 37 3. Press the button.
- 37 4. Use the four-way controller (pq) to select [PC Camera], then press the button.
- 37 5. Connect your camera and the computer via the supplied USB cable.
- 37 6. Position the digital camera steadily on top of your computer monitor or use a tripod.
- 37 Step 3: Run your application software (i.e. Windows NetMeeting)
- 37 2. Click the Start Video button to view live video.
- 37 3. Click the Place Call button.
- 37 4. Type the e-mail address or the network address of the computer that you are calling.
- 37 5. Click Call. The person that you are calling must also have Windows NetMeeting running and be willing to accept your call to start the videoconference.
- 38 MENU OPTIONS
- 38 Camera Menu
- 38 2. Press the MENU button, then use the four-way controller (tu) to select the [Mode1] / [Mode2] / [Mode3] menu.
- 38 3. Use the four-way controller (pq) to select the option item, then press the button.
- 38 4. Press the four-way controller (pq) to select the desired setting, then press the button.
- 41 Movie Menu
- 41 2. Press the MENU button.
- 41 3. Press the four-way controller (pq) to select the option item. Then press the button.
- 41 4. Press the four-way controller (pq) to select the desired setting, then press the button.
- 41 5. To exit the movie menu, press the MENU button.
- 42 Playback Menu
- 42 2. Press the MENU button, then use the four-way controller (pq) to select the [Playback1] / [Playback2] menu.
- 42 3. Use the four-way controller (pq) to select the option item, then press the button.
- 42 4. Press the four-way controller (pq) to select the desired setting, then press the button.
- 42 5. To exit the playback menu, press the MENU button.
- 44 Setup Menu
- 44 2. Press the four-way controller (tu) to select the [Set-up1] / [Set-up2] / [Set-up3] menu.
- 44 3. Use the four-way controller (pq) to select the desired option item, then press the button.
- 44 4. To exit the setup menu, rotate the mode dial to another mode.
- 46 SPECIFICATIONS
- 47 TROUBLESHOOTING GUIDE
- 48 POSSIBLE NUMBER OF RECORDABLE IMAGES
- 49 CONNECTING TO A PICTBRIDGE-COMPATIBLE PRINTER (OPTIONAL)
- 49 2. Press the four-way controller (u) to select the [Set-up2] menu, then use the four-way controller (q) to select [USB Mode]. Press the button.
- 49 3. Use the four-way controller (pq) to select [PictBridge], then press the button.
- 49 4. Connect your camera and the printer via a supplied USB cable.
Other manuals and documents
Frequently Answers and Questions
What should I do if the camera has fallen or its case has been damaged?
Turn the power off and remove the battery. Continued use might cause fire or electric shock. Consult the store of purchase.
What is the procedure if foreign objects or water have entered the camera?
Turn the power off and remove the battery. Continued use might cause fire or electric shock. Consult the store of purchase.
How to correct interference to radio communications?
Reorient or relocate the receiving antenna, increase the separation between the equipment and receiver, connect the equipment into an outlet on a circuit different from that to which the receiver is connected, or consult the dealer or an experienced radio/TV technician for help.
advertisement