Rosemount 3144P HART

Manuals and User Guides for Rosemount 3144P HART. We found 1 manuals for free downloads Quick Installation Guide

Below you will find brief information for Temperature Transmitter 3144P. This guide provides general installation guidelines for the Rosemount 3144P temperature transmitter with HART protocol. It covers system readiness, configuration checks, switch settings, transmitter installation, connection and power-up, loop testing, and safety instrumented systems (SIS). For detailed configuration, diagnostics, and troubleshooting, refer to the complete 3144P manual.

Key Features

  • HART protocol support
  • Dual sensor capability
  • Explosion-proof/Intrinsically safe options
  • Wide voltage range (12-42.4V DC)
  • Loop test functionality
  • Alarm and shutdown configuration via switches

Pages: 28 Rosemount 3144P HART Quick Installation Guide

Brand: Rosemount Category: Temperature transmitters Size: 806 KB

Languages: English

Open manual

Frequently Answers and Questions

How do I switch between HART 5 and HART 7 versions?
Use the 'Manual Setup>Device Information>Identification>Message' menu. Enter 'HART5' for version 5 or 'HART7' for version 7.
What is the required loop resistance for communication?
Between 250 and 1100 ohms.
What are the grounding recommendations for different sensor types?
The document outlines three grounding solutions depending on whether the transmitter housing is grounded or not, and the sensor type (grounded thermocouple vs. ungrounded RTD/resistance).
How do I perform a loop test?
Connect an external ammeter in series with the transmitter loop, then use the communicator's service tools to simulate different mA output values and verify the reading on the ammeter.

advertisement