20 Manuals

SGM LEKTRA SGM-100F

Manuals and User Guides for SGM LEKTRA SGM-100F. We found 2 manuals for free downloads Manual, User manual

Below you will find brief information for ultrasonic flowmeter SGM-100F. The SGM-100F is designed to measure the flow velocity of a liquid in closed conduits. It consists of a digital converter and two ultrasonic transducers. The transducers can be either clamp-on or insertion type.

Key Features

Clamp-on or insertion ultrasonic transducers
Alphanumeric backlit display
4-20mA current loop output
RS232 and RS485 serial communication
Programmable frequency output
Data logger with 24KB of memory
Totalizer with daily, monthly and yearly accumulation
Flow rate unit selection (m3/h, l/min, gal/min, etc.)
Alarm functions (low flow, high flow, reverse flow, etc.)

Pages: 24 SGM LEKTRA SGM-100F Manual

Brand: SGM LEKTRA Category: Measuring, testing & control Size: 4 MB

Languages: English

Open manual

Frequently Answers and Questions

What is the working principle of the SGM-100F?

The SGM-100F uses two transducers to transmit and receive ultrasonic signals through the pipe wall. The difference in travel time between the signals is directly related to the flow velocity of the liquid.

What are the possible installation methods for the transducers?

The transducers can be installed in V-method, Z-method, N-method, or W-method, depending on the pipe diameter and characteristics.

How do I configure the SGM-100F for different flow units?

You can use the menu windows M30 and M31 to select the desired unit system (metric or English) and flow unit (m3/h, l/min, gal/min, etc.).

What are the alarm functions available in the SGM-100F?

The SGM-100F has alarm functions for low flow, high flow, reverse flow, no signal detected, poor signal, and frequency output overflow. You can configure the alarm thresholds and output type (Buzzer or OCT) through the menu windows.

How can I access the data logger?

The SGM-100F has a built-in data logger that can store up to 2000 lines of data. You can access the data logger through the menu windows M50-M53 to view, clear, and configure the logging settings.

What is the communication protocol used by the SGM-100F?

The SGM-100F uses a standard communication protocol based on ASCII commands. You can control the device and retrieve data through the RS232 or RS485 interface using the commands provided in the user manual.