1. manualzz.com
  2. computers & electronics
  3. networking
  4. network transceiver modules

STMicroelectronics GSBT2416C2DB AT1

Manuals and User Guides for STMicroelectronics GSBT2416C2DB AT1. We found 1 manuals for free downloads User manual

Below you will find brief information for Bluetooth module GSBT2416C2DB, Bluetooth module GSBT2416C2DB.AT1. The GSBT2416C2DB is a Bluetooth Class 2 Demo board for GSBT2416C2 Bluetooth module including the RF antenna. It comes with a downloaded firmware that enables the user to interface the Bluetooth module with HCI commands. The Bluetooth module GSBT2416C2DB.AT1 is a board with a downloaded firmware that enables the user to create a Bluetooth link with simple AT commands which can be accessed via the DB9 connector. The SPBT2425C2DB board can be supplied with an external 5V DC source or via the USB port.

Key Features

  • Bluetooth V1.2 board

  • Serial interface on DB9 connector

  • USB connection

  • PCB antenna on board

  • Single 5 V supply voltage

  • CE compliant

  • FCC compliant

  • HCI commands and AT commands

  • AT commands sent by serial line

  • External 5V or USB power supply

Pages: 13 STMicroelectronics GSBT2416C2DB AT1 User manual

Brand: STMicroelectronics Category: Network transceiver modules Size: 335 KB

Languages: English

Open manual

Frequently Answers and Questions

What is the difference between GSBT2416C2DB and GSBT2416C2DB.AT1?

The GSBT2416C2DB uses HCI commands and can be downloaded with files developed by the user. The GSBT2416C2DB.AT1 uses AT commands and allows the user to create a Bluetooth link with simple AT commands

How do I connect to a Bluetooth device using the GSBT2416C2DB.AT1?

Connect the board to a PC using a RS232 cable, power it on, configure it with AT commands, then connect to another Bluetooth device using the AT+BTCONNECT command

What are the operating conditions for the GSBT2416C2DB.xxx?

The board can operate at a temperature between -20°C and 70°C and requires a supply voltage between 4V and 6V.

How do I download a file into the GSBT2416C2DB?

Connect the board to a PC, put a jumper on JP1, power it on, open the Flash loader program, choose the correct COM port and firmware, then press start to initiate the download.

What are the certifications for the GSBT2416C2DB.xxx?

The board is CE and FCC compliant, and has been tested to meet the requirements of various standards including EN 300 328, EN 301 489-17, EN 60950-1 and CFR47 part 15.

How do I establish a connection between two GSBT2416C2DB.AT1 boards?

Configure one board as the client and the other as the server using AT commands, then use the AT+BTCONNECT command to establish a connection between them.

What is the purpose of the MACRO commands?

The MACRO commands allow you to store a sequence of AT commands in the internal flash memory of the module, which will be executed automatically when the module powers up.

How do I determine the Bluetooth address of a module?

Use the AT+BTSETTINGS=? command to retrieve the relevant information, including the BT address.

advertisement