STMicroelectronics SPEAr1310
Manuels et Guides de l''Utilisateur pour STMicroelectronics SPEAr1310. Nous avons trouvé 3 manuels pour téléchargements gratuits User manual, Reference manual
Below you will find brief information for SPEAr320 EVALSPEAr320CPU. The SPEAr320 EVALSPEAr320CPU is a CPU evaluation board that allows you to evaluate the SPEAr320 microprocessor. It features up to 2 Gbit of DDR2 memory, up to 16 Mbyte of Serial Flash memory, two USB 2.0 full host ports, one USB 2.0 host device port, and one serial port. The board also includes a JTAG debug interface.
Fonctionnalités clés
SPEAr320 embedded MPU
Up to 2 Gbit DDR2 333 MHz
Up to 16 Mbyte Serial Flash memory
Two USB 2.0 full host port channels
One USB 2.0 host device port
One serial port (up to 115 baud)
JTAG Debug ports
Des pages: 39 STMicroelectronics SPEAr1310 User manual
Marque: STMicroelectronics Catégorie: Motherboards Taille: 485 KB
La langue(s): English
Sommaire
Ouvrir le manuelAutres manuels et documents
Réponses et questions fréquentes
What is the purpose of the SPEAr320 CPU evaluation board?
The SPEAr320 CPU evaluation board allows you to evaluate the SPEAr320 microprocessor. It provides access to the key features of the SPEAr320 microprocessor, including its memory, peripherals, and debug interface.
What is the boot procedure for the SPEAr320 CPU evaluation board?
The board can boot a Linux kernel that has been pre-installed in the serial NOR Flash. It can be stopped in uBoot or boot Linux automatically after power on.
What is the purpose of the JTAG interface?
The JTAG interface is used for static debugging, which means that it is possible to set a breakpoint, and when the system stops, verify the contents of the memory or registers, or both, and modify them if needed.
How can I select the debug feature?
To select the debug feature, set Switch SW1 bits [2:1] using the dip switch SW1 on the board. Refer to the table for bit settings.
publicité