STMicroelectronics STDES-EVT001V1
Manuals and User Guides for STMicroelectronics STDES-EVT001V1. We found 1 manuals for free downloads User manual
Below you will find brief information for STDES-EVT001V1. This document serves as a user manual for the 1 kW BLDC traction controller reference design, optimized for light electric vehicles. It details the design's architecture, including its 48 VDC operation, 6-step motor control algorithm with Hall sensor feedback, and hardware-based fault protection for overcurrent, overvoltage, and undervoltage. The guide also provides instructions on configuring the firmware using a GUI and setting up the hardware for field testing.
Key Features
48 V DC 1 kilowatt design
Six Step drive commutation topology
Input Voltage range: 42 VDC to 65 VDC
Efficiency > 80%
Compatible with any 5 V throttle
Compatible with 48 V 3-phase BLDC motor with Hall sensor feedback
Overcurrent, overvoltage and undervoltage protection
Speed and position feedback fault detection
VIPER115LS based auxiliary power supply
3 LEDs for fault indication
Pages: 36 STMicroelectronics STDES-EVT001V1 User manual
Brand: STMicroelectronics Category: Electrical equipment & supplies Size: 3 MB
Languages: English
Table of contents
Open manualFrequently Answers and Questions
What is the nominal input voltage and peak current for the 1 kW traction controller?
The 1 kW BLDC traction controller is designed for low voltage battery-powered light electric vehicles running on nominal 48 VDC and 50 A peak current.
What motor control logic is used in this reference design?
The motor control logic is based on six step commutation in voltage mode, with Hall Sensor feedback for position detection.
How can the firmware be configured and downloaded onto the microcontroller?
Detailed instructions are provided for configuring the firmware with an easy-to-use GUI and compiling the binary files for download onto the STM8S microcontroller.
What communication protocols are supported by the microcontroller section?
The microcontroller section on the board can accommodate I²C and UART communication protocols for enhanced interfacing and control such as LCD display.
What protection mechanisms are included in the design?
The design includes overcurrent, overvoltage, and undervoltage protection, an option for two levels of overcurrent protection, and speed and position feedback fault detection and protection.
Questions & Answers
B B P
Which tools are recommended for programming the STM8S microcontroller and code development?
Use the ST-LINK programmer/debugger for programming the microcontroller, and the ST Visual Development (STVD) environment with COSMIC C toolchains for code development.
V V P
What software and hardware tools are necessary to program the 1 kW traction controller?
Programming the 1 kW traction controller requires the ST Visual Development (STVD) environment along with the COSMIC C toolchains. The STM8 MC FW builder is used to develop specific motor control firmware configuration files. An ST-LINK programmer/debugger is required for debugging.
Q Q Q
Does existing code for the BLDC traction control firmware exist?
Existing code for the BLDC traction control firmware is available. It is based on the STM8 BLDC Motor control library and can be further customized using the ST Visual Development (STVD) environment.
advertisement