STMicroelectronics STEVAL-PCC009V2
Manuals and User Guides for STMicroelectronics STEVAL-PCC009V2. We found 6 manuals for free downloads User manual
**STMicroelectronics EVLPOWERSTEP01** is an evaluation board that is based on the powerSTEP01 system-in-package implementing a complete stepper motor driver for high power applications. It is designed to operate with a supply voltage ranging from 10.5 V to 85 V with a maximum current of 10 Ar.m.s. In combination with the STEVAL-PCC009V2 demonstration board and the SPINFamily evaluation tool, the board provides a complete and easy-to-use evaluation environment allowing the user to investigate all the features of the powerSTEP.
Key Features
USB-to-serial interface bridge
Configurable 10-pin and 30-pin interface
Supports I2C, SPI and UART communication protocols
Provides GPIO control, ADC and PWM functions
DFU mode for firmware update
DLL files for custom GUI development
Rapid prototyping tool
Pages: 20 STMicroelectronics STEVAL-PCC009V2 User manual
Brand: STMicroelectronics Category: Electrical equipment & supplies Size: 361 KB
Languages: English
Table of contents
Open manualOther manuals and documents
Frequently Answers and Questions
What is the purpose of the IBU universal interface tool?
The IBU universal interface tool is a development tool that allows you to interface with various devices that use I2C, SPI, and UART communication protocols. It also provides control over GPIO pins and ADC channels, making it useful for rapid prototyping.
How do I connect a daughter board to the IBU universal interface tool?
The IBU universal interface tool has a 10-pin and a 30-pin header. Depending on the specific daughter board you are using, connect the appropriate signals, including SDA, SCL, SCK, MISO, MOSI, NSS, TX, RX, and GND, to the corresponding pins on the header.
What are the different communication modes available on the IBU universal interface tool?
The IBU universal interface tool supports three modes: I2C, SPI, and UART, each with its own settings and capabilities. You can select the desired mode using the provided DLL files.
How can I control GPIO pins using the IBU universal interface tool?
The IBU universal interface tool allows you to control GPIO pins through various modes, including simple input, input with interrupt, and push-pull output. You can also use some GPIOs as PWM clock signals and ADC channels.
How do I update the firmware on the IBU universal interface tool?
The IBU universal interface tool comes with a built-in DFU mode. You can use this mode to update the firmware by following the instructions provided in the user manual.
What is the purpose of the DLL files provided with the IBU universal interface tool?
The DLL files are provided with the IBU universal interface tool to allow you to create your own custom GUI applications. The DLLs help to interface with the tool and provide access to its various features.
advertisement