6672 Manuals

Sanyo MCO-19AIC (UV)

Manuals and User Guides for Sanyo MCO-19AIC (UV). We found 2 manuals for free downloads instruction manual, Service manual

Below you will find brief information for CO2 Incubator MCO-19AIC MCO-19AIC(UV). These incubators provide precise temperature and CO2 control for cell cultures. Features include a UV lamp for decontamination, adjustable alarms, and remote alarm terminals. The units are designed for safe and reliable operation, with detailed instructions for installation, maintenance, and troubleshooting. They also include automatic CO2 cylinder changeover and calibration.

Key Features

Precise temperature and CO2 control
UV lamp for decontamination
Adjustable alarms and remote alarm terminals
Automatic CO2 cylinder changeover
Automatic CO2 density calibration

Pages: 68 Sanyo MCO-19AIC (UV) instruction manual

Brand: Sanyo Category: Power generators Size: 875 KB

Languages: English

Open manual

Frequently Answers and Questions

How do I set the chamber temperature and CO2 density?

Use the control panel's MENU key to access the settings, and adjust the parameters as instructed in the manual.

What are the safety precautions when using the UV lamp?

Never look directly at the UV light. Consult the manual for detailed safety instructions.

How do I perform routine maintenance?

Clean the chamber and inner attachments regularly, and refill the humidifying pan with sterile distilled water as needed, consult the manual for details.

What should I do if an alarm sounds?

Immediately check the cause of the alarm as described in the troubleshooting section of the manual.

Questions & Answers

2024-10-16

L L P

How does the CO2 sensor measure CO2 concentration?

It uses a double wavelength IR sensor.

2024-10-16

M M P

How does a dual-wavelength infrared sensor measure CO2 concentration?

The sensor emits infrared light at two wavelengths. One wavelength is absorbed by CO2, while the other is not. The difference in absorption between these wavelengths determines the CO2 concentration.

2024-12-19

X X P

What device uses part number 624-205-7703?

Part number 624-205-7703 is a DC24V FAB11-X2265 CO2 valve or CO2 auto changer valve.