245 Manuals

Seitron TR D01B

Manuals and User Guides for Seitron TR D01B. We found 5 manuals for free downloads User manual

Below you will find brief information for Wireless Thermostat TR D01B. This wireless thermostat is designed to control the room temperature with different adjustment modes like Comfort, Economy, Off/Antifrost, etc. The display has backlighting and floor temperature indicator. The device is compatible with a wide range of receivers like DAPF84, DLP841M, DLP8412, DLP241M, DRPF84M01.

Key Features

Wireless control
Comfort, Economy, Off/Antifrost modes.
Backlit display
Floor temperature control
Second stage integration
Compatibility with receivers
PWM output
External NTC sensor

Seitron Wireless Thermostat TR D01B User Manual

Pages: 4 Seitron TR D01B User manual

Brand: Seitron Category: Thermostats Size: 336 KB

Languages: English

Open manual

Frequently Answers and Questions

How do I adjust the room temperature in comfort mode?

You can adjust the room temperature by pressing the '3' and '4' keys. The display shows the room temperature detected on the top digits (A of Fig. 2), while the relative set-point temperature on the bottom digits (B of Fig. 2). You can also press ' ' key to display the floor temperature on display.

How do I configure the thermostat to drive the second stage?

To configure the thermostat to drive the second stage, you need to set parameter P02 on 'Yes' and customize the integration set-point ∆ on parameter P29.

How do I change the heating/cooling mode?

The thermostat is default set in heating mode. Hold ' ' pressed for 10 minutes to modify the adjustment mode. A. Cooling mode will be set if the thermostat was previously set on heating and the symbol ' ' will flash on display for 8 seconds. B. Heating mode will be set if the thermostat was previously set on cooling and the symbol ' ' will flash on display for 8 seconds.

What is the default antifrost temperature?

The antifrost temperature is default set at 6°C and the thermostat is configured so the antifrost temperature cannot be modified by the user. If wanting to modify it, set parameter P18 on 'YES'; therefore, the antifrost temperature can be modified with thermostat off, using the keys '3' or '4'.

How do I access the installer configuration?

Hold '4' and ' ' simultaneously pressed for a few seconds until the “key” symbol and the writing “Con” (configuration) appear on the display, to access configuration.

How do I reset the installer configuration?

Reset installer configuration in order to bring all parameters to default values by accessing configuration and, when the display shows 'Con', simultaneously press '3' or '4' for a few seconds until the screen goes back to normal display.