Sharp PC-9800T
Manuals and User Guides for Sharp PC-9800T. We found 4 manuals for free downloads Manual, Specification, instruction manual
Sharp PC-9800T manual
Brand: Sharp Category: Notebooks Size: 3 MB Pages: 125
Languages: English
Open in a new tab
Sharp PC-9800T Instruction manual
Brand: Sharp Category: Notebooks Size: 6 MB Pages: 271
Languages: English
Open in a new tab
Sharp PC-9800T Specifications
Brand: Sharp Category: Notebooks Size: 3 MB Pages: 185
Languages: English
Table of contents
- 4 Features
- 6 specifications
- 6 2.1 List of specifications
- 7 2.2 Outline drawing
- 8 2.3 Part names
- 9 2.4 Various pin arrangements
- 10 2.5 Remote control
- 11 2.6 Remote control case
- 12 Installation
- 12 3.1 Installation environment
- 14 3.2 Installation conditions
- 14 3.2.1 Radiation
- 14 3.2.2 Calculating calorific values
- 15 3.2.3 Installation position
- 17 3.2.4 Strain on surface where equipment is installed
- 18 3.3 Installation procedure
- 18 3.3.1 Precautions for transportation
- 18 3.3.2 Unpacking
- 20 3.3.3 Wiring
- 24 3.4 Special installations
- 24 3.4.1 Fixing on a structure
- 26 3.4.2 Wall hanging
- 30 3.4.3 Wall embedding
- 34 3.4.4 When the display is put in a box
- 38 3.4.5 Wall hanging (vertically wall-hanging equipment)
- 42 3.4.6 Wall embedding (vertically wall-embedding equipment)
- 46 3.4.7 Ceiling suspension (using wires)
- 48 3.4.8 Installation with the screen downward
- 50 3.4.9 Ceiling embedding
- 52 3.4.10 Installation on the floor
- 54 3.4.11 Installation under the floor
- 58 3.4.12 Installation under the floor (using the PDM-4001)
- 60 3.4.13 Horizontal connections
- 61 3.4.14 Vertical connections
- 62 Mounting stadard metal fixtures
- 62 4.1 Functions and features of standard metal fixtures
- 64 4.2 Handling standard metal fixtures
- 64 4.2.1 Precautions on handling metal fixtures
- 64 4.2.2 Precautions for vendors performing the installation
- 65 4.3 Stand (an accessory to PDP-V402 <PDP-V402E>)
- 65 4.3.1 Installing the stand
- 66 4.3.2 Outer-dimensions diagram (Unit: mm)
- 67 4.4 Down converter PDA
- 67 4.4.1 Specifications
- 68 4.4.2 Outline drawing (Unit: mm)
- 69 4.4.3 The outline from setting up to adjusting of down converter
- 71 4.4.4 Before using the down converter
- 72 4.4.5 Mounting on the plasma display
- 75 4.4.6 When mounting using only this device
- 77 4.4.7 Repackaging procedure
- 78 4.4.8 Operating a down converter
- 82 4.5 Tilting stand: PDK
- 82 4.5.1 Specifications
- 82 4.5.2 Outer-dimension diagram (Unit: mm)
- 83 4.5.3 Assembling and installing the metal fixture and mounting the plasma display
- 86 4.6 One-sided, ceiling-suspension metal fixture for the plasma display: PDK
- 86 4.6.1 Specifications
- 87 4.6.2 Outer-dimension diagram (Unit: mm)
- 88 (same procedure as for the PDK-4003)
- 92 4.7 Double-sided, ceiling-suspension metal fixture for the plasma display: PDK
- 92 4.7.1 Specifications
- 93 4.7.2 Outer-dimension diagram (Unit: mm)
- 93 4.7.3 Assembling and installing the metal fixture and mounting the plasma display
- 94 4.8 Ceiling-suspension metal fixture for the plasma display (head screw type): PDK
- 94 4.8.1 Specifications
- 94 4.8.2 Outer-dimension diagram (Unit: mm)
- 96 4.8.3 Assembling and installing the metal fixture and mounting the plasma display
- 99 4.9 PDP bracket: PDK
- 99 4.9.1 Specifications
- 100 4.9.2 Assembling and installing the metal fixture and mounting the plasma display
- 105 4.10 Wall hanging metal fixture for the plasma display : PDK
- 105 4.10.1 Specifications
- 106 4.10.2 Assembling and installing the metal fixture and mounting the plasma display
- 111 4.11 Mobile cart:PDK
- 111 4.11.1 Specification
- 112 4.11.2 Assembling and mounting the metal fixtures, and mounting the plasma display
- 113 4.11.3 Mounting procedure
- 115 4.11.4 In case of mounting an optional protective filter
- 117 4.12 Partition Multiple installation fixture
- 117 4.12.1 Specification
- 118 4.12.2 Outer dimensional drawing [Unit: mm]
- 119 4.12.3 Installation conditions
- 122 4.12.4 Before installation and assembly
- 123 4.12.5 Installation and assembly
- 143 4.13 Protective filter: PDA
- 143 4.13.1 Specifications and features (Protective filter: PDA-4002)
- 143 4.13.2 Assembling and installing the metal fixture and mounting the plasma display
- 146 4.13.3 Mounting the PDP bracket (PDK-4005) with PDA-4002 mounted
- 147 4.14 Speaker system: PDP-S03-LR
- 147 4.14.1 Before operation
- 147 4.14.2 Specifications
- 148 4.14.3 Assembling and installing the metal fixture and mounting the plasma display
- 151 after the optional speakers are attached to the plasma display main body
- 155 Adjustment
- 155 5.1 Before Beginning Adjustments
- 155 5.1.1 Operating mode
- 156 5.1.2 Combination in use of remote, unit operating panel, and PC
- 157 5.1.3 List of adjustable items
- 158 5.1.4 Picture quality and white-balance adjustment memory
- 159 5.1.5 Phase-adjustment memory
- 160 5.1.6 Last memory
- 161 5.1.7 Aging
- 163 5.2 Menu mode
- 163 5.2.1 Various adjustments and setting
- 167 5.3 Integrator mode
- 167 5.3.1 Adjustments and setting in the integrator mode
- 176 5.3.2 Precautions
- 177 5.4 RS-232C adjustment mode
- 177 5.4.1 Precaution
- 177 5.4.2 Interface
- 179 5.4.3 RS-232C commands table
- 181 5.4.4 List of GET commands
- 183 5.5 KEY LOCK/UNLOCK
- 183 5.5.1 Functions
- 183 5.5.2 Setting method
- 184 6.1 Pseudo contour
- 185 6.2 Precautions
Sharp PC-9800T Specifications
Brand: Sharp Category: Notebooks Size: 3 MB Pages: 136
Languages: English
Table of contents
- 4 Features
- 6 Specifications
- 6 2.1 List of specifications
- 7 2.2 Outline drawing
- 8 2.3 Part names
- 9 2.4 Remote control
- 10 Installation
- 10 3.1 Installation environment
- 12 3.2 Installation conditions
- 12 Radiation
- 12 Calculating calorific values
- 13 Installation position
- 15 Strain on surface where equipment is installed
- 16 3.3 Installation procedure
- 16 Precautions for transportation
- 16 Unpacking
- 18 Wiring
- 20 3.4 Special installations
- 20 Fixing on a structure
- 22 Wall hanging
- 24 Wall embedding
- 28 Ceiling suspension (using wires)
- 30 Installation with the screen downward
- 32 Ceiling embedding
- 36 Installation on the floor
- 38 Installation under the floor
- 42 Installation under the floor (using the PDM-4001)
- 44 3.4.10 Wall hanging (vertically wall-hanging equipment)
- 46 3.4.11 Wall embedding (vertically wall-embedding equipment)
- 50 3.4.12 Horizontal connections
- 54 3.4.13 Vertical connections
- 56 Mounting standard metal fixtures
- 56 4.1 Functions and features of standard metal fixtures
- 57 4.2 Handling standard metal fixtures
- 57 Precautions on handling metal fixtures
- 57 Precautions for vendors performing the installation
- 58 4.3 Stand (an accessory to PDP-V401 <PDP-V401E>)
- 58 Installing the stand
- 59 Outer-dimentions diagram
- 60 4.4 Tilting stand: PDK
- 60 Specifications
- 61 Assembling and installing the metal fixture and mounting the plasma display
- 64 4.5 One-sided, ceiling-suspension metal fixture for the plasma display: PDK
- 64 Specifications
- 66 Assembling and installing the metal fixture and mounting the plasma display
- 70 4.6 Double-sided, ceiling-suspension metal fixture for the plasma display: PDK
- 70 Specifications
- 71 Assembling and installing the metal fixture and mounting the plasma display
- 72 4.7 Ceiling-suspension metal fixture for the plasma display (head screw type): PDK
- 72 Specifications
- 73 Assembling and installing the metal fixture and mounting the plasma display
- 76 4.8 PDP bracket: PDK
- 76 Specifications
- 77 Assembling and installing the metal fixture and mounting the plasma display
- 82 4.9 Wall hanging metal fixture for the plasma display: PDK
- 82 Specifications
- 83 Assembling and installing the metal fixture and mounting the plasma display
- 90 4.10 Infrared reduction filter: PDA-4001, protective filter: PDA
- 90 4.10.1 Specifications and features (infrared reduction filter: PDA-4001)
- 91 4.10.2 Specifications and features (protective filter: PDA-4002)
- 92 4.10.3 Assembling and installing the metal fixture and mounting the plasma display
- 95 4.10.4 White balance
- 95 4.10.5 Mounting the PDP bracket: PDK-4005, with PDA-4001 and PDA-4002 mounted
- 96 4.11 Speaker system: PDP-S01-LR
- 96 4.11.1 Before operation
- 96 4.11.2 Specifications
- 97 4.11.3 Assembling and installing the metal fixture and mounting the plasma display
- 100 to the plasma display main body
- 106 Adjustment
- 106 5.1 Before making adjustments
- 106 5.1.1 Operation mode
- 110 5.1.2 Picture quality and white-balance adjustment memory
- 111 5.1.3 Phase-adjustment memory
- 111 5.1.4 Using the plasma display main body and the remote control together with the personal control
- 112 5.1.5 Last memory
- 113 5.1.6 Aging
- 114 5.2 Performing adjustments on the plasma display operation panel and remote control
- 114 5.2.1 Menu mode
- 118 5.2.2 Integrator mode
- 125 5.2.3 Precautions
- 126 5.3 Outer control by RS232C
- 126 5.3.1 Precautions
- 127 5.3.2 Interface
- 128 5.3.3 RS232C commands table
- 130 5.3.4 List of GET commands
- 132 Precautions for functions and operation
- 132 6.1 KEY LOCK/UNLOCK
- 132 6.1.1 Functions
- 132 6.1.2 Setting method
- 133 6.2 Mask color select/off when NTSC is input
- 133 6.2.1 Functions
- 133 6.2.2 Setting method
- 133 6.2.3 Precautions
- 134 is input
- 134 6.3.1 Functions
- 134 6.3.2 Setting method
- 134 6.3.3 Precautions
- 134 6.4 Pseudo-contour
- 135 6.5 Precautions
- 136 Maintenance