1. manualzz.com
  2. computers & electronics
  3. audio & home theatre
  4. video line amplifiers

Sigma Electronics WC-2100 WC-2600

Инструкции и руководства для Sigma Electronics WC-2100 WC-2600. Мы нашли 1 инструкции доступные для бесплатного скачивания instruction manual

Below you will find brief information for word clock distribution amplifier WC-2100, word clock distribution amplifier WC-2600. The WC-2100 is a distribution amplifier for 48 kHz TTL, SDIF-2 word-clock reference signals. The input of the WC-2100 is terminated into 75Ω. The unit provides 6 isolated outputs per module. Outputs are designed to drive 75Ω loads. If an output is not used it is not necessary to apply a 75Ω termination to the output. The WC-2100 operates from bus voltages of unregulated +20 VDC and -20 VDC. These voltages are supplied by the Sigma frame/power supply. The module regulates the bus voltage to +5 VDC and -15 VDC respectively. Circuit protection is provided by a PTC Thermistor (Positive Temperature Coefficient Thermal Resistor) which serve as a permanent fuse.

Ключевые особенности

  • 6 isolated outputs per module
  • TTL input and output
  • Gain control
  • 75Ω input and output impedance
  • Operates from +20 VDC and -20 VDC bus voltages
  • PTC thermistor for circuit protection

Страниц: 5 Sigma Electronics WC-2100 WC-2600 instruction manual

Бренд: Sigma Electronics Категория: Video line amplifiers Размер: 145 KB

Языки: English

Открыть мануал

Часто задаваемые вопросы

What is the input impedance of the WC-2100?
The input impedance is 75Ω, terminated.
How many outputs does the WC-2100 have?
The WC-2100 has six isolated outputs.
What type of signal does the WC-2100 distribute?
The WC-2100 distributes 48 kHz TTL, SDIF-2 word-clock reference signals.
What is the output impedance of the WC-2100?
The output impedance is 75Ω, source terminated.
How do I connect the WC-2100 to a power supply?
The WC-2100 operates from bus voltages of unregulated +20 VDC and -20 VDC, supplied by the Sigma frame/power supply.

реклама